Jazz Speakers J-9938A Bedienungsanleitung Seite 2

Decoder box Operation Instruction
Decoder Box
(front)
1.1 Power
1.2 Volume
1.3 Mute
1.4 Mode
1.5 Input
1. Front Panel Control Functions
1.1 Power : Turns system power on/off.
1.2 Volume (+/-) : Raises or lowers the systems volume level.
1.3 Mute : Mutes/Restores systems volume.
1.4 Mode : Manual selection of audio modes. Choices are Dolby Digital, Dolby
Pro Logic and Stereo.
1.5 Input : Manual selection of audio input modes. Choices are Line, Optical, and
Coaxial.
2. Outputs
2.1 OUTPUT : 9 pin DIN jacks for 6 channels analog audio signal output.
2.2 L/R : 3.5mm jack for Front Left and Front Right analog audio signal output.
2.3 CEN/SUB : 3.5mm jack for Center and Sub-Woofer analog audio signal
output.
2.4 LS/RS : 3.5mm jack for Left Surround and Right Surround analog audio signal
output.
3. Inputs A : Analog audio source
3.1 Line 1 : Left/Right RCA input jacks for analog audio source.
3.2 Line 2 : Left/Right 3.5mm input jacks for analog audio source.
4. Inputs B : Digital audio source
4.1 Optical : Optical fiber input for digital audio source (PlayStation 2, DVD player
or device with optical digital output).
4.2 Coaxial : Coaxial input for digital audio source (DVD player or device with
coaxial digital output).
5.Power Input
5.1 DC IN : DC power input jack.
Downloaded from www.Manualslib.com
Decoder Box
(back)
2.1 OUTPUT
2.2 L/R
2.3 CEN/SUB
2.4 LS/RS
3.1 Line 1
3.2 Line 2
4.1 Optical
4.2 Coaxial
5.1 DC IN
1
manuals search engine
(English)
1. LED Display
Fig.1
1. LED Display : Displays audio mode status.
1.1. 321 = 5.1 Channels (Digital)
1.2. 221 = 4.1 Channels (Pro Logic)
1.3. 200 = Stereo (2 Channel)
2. % Symbol : Will light when using the Dynamic adjustment function.
3. ms Symbol : mini second, Will light while using the C_Delay or S_Delay
adjustment functions.
4. db Symbol : Will light when using the Volume or Trim adjustment functions.
5. Speaker Icons : Indicate active speakers in different mode. For example, 6
speakers and listener will light on when Dolby Digital mode was selected.
And only listener, left and right speakers are light on when Stereo mode selected.
6. LOCK : The decoder can automatically detect the input signal and audio type.
When both are detected, the lock indicator will light.
7. LINE : LED will light on if input signal comes from line input.
8. OPTICAL : LED will light on if input signal comes from Optical.
9. COAXIAL : LED will light on if input signal comes from Coaxial.
10. Dolby Digital : Dolby Digital audio mode is selected.
11. Pro Logic : Dolby Pro Logic audio mode is selected.
12. ST : Stereo audio mode is selected.
Indicator Display Lights
5. Speaker Icons
2. % Symbol
6. LOCK
3. ms Symbol
7. LINE
4. db Symbol
8. OPTICAL
9. COAXIAL
2
10. Dolby Digital
11. Pro Logic
12. ST
Fig.2