Package Contents; Cleaning And Maintenance - Prozis Velox Handbuch

CAUTION! This symbol highlights dangerous situations
that can lead to light injuries, or damage, malfunction, and/
or destruction of the device.
TO PREVENT HARM OR DAMAGE TO USERS OR OTHERS, MAKE SURE TO COM-
PLY WITH THE BELOW REQUIREMENTS.
• Cycling can be physically demanding and presents some risks. Never ride on your own and
keep an eye on traffic. Never forget to wear a helmet.
• Do not use a sharp object to remove batteries.
User Manual

PACKAGE CONTENTS

1 × Prozis Velox - Speed & Cadence Sensor
1 × CR2032 Battery
2 × Rubber Mat (flat & curved)
4 × Band (2 large & 2 small)
1 × Quick Guide

CLEANING AND MAINTENANCE

• Do not subject the components to high pressure water jets.
• Do not use solvents and petroleum-based products. Wash with warm water and soap if
necessary. Clean with a dry cloth.
STORAGE
• Do not store the sensor in a wet and gas-tight environment.
• When not using the device, store the product in a dry environment, protected from dust
and direct sunlight.
• Remove the batteries if you do not use the device for a long period of time.
• Store the device in the original packaging.
PRODUCT OVERVIEW (SEE PAGE 2)
1.Battery opening 2.Mode indicator light 3.Curved rubber mat (speed mode) 4.Flat rubber
mat (cadence mode) 5.Large rubber band (speed mode) 6.Small rubber band (cadence
mode)
INSTRUCTIONS
Make sure the battery is correctly installed and remove the insulating sheet, before
starting to pair: see page 2, figure A1.
EN
7