Renkforce 1378398 Bedienungsanleitung Seite 2

Operating instructions
Speaker stand
Item no. 1378398
Intended use
The speaker stand is designed to secure a speaker with a standard Ø35 mm connector. The
speaker height can be adjusted using the telescopic rod. The speaker stand is designed for an
evenly distributed load of up to 45 kg.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition,
improper use can cause injuries. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Speaker stand
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Be careful not to trap your fingers or other parts of your body when opening, closing
and adjusting the stand.
• Get another person to help when lifting heavy speakers in order to avoid injury (e.g.
back injuries).
• Fold out the legs completely to ensure that the stand is secure.
• Always secure the speaker onto the stand.
• Never overload the stand.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Maintenance and cleaning
• You do not need to carry out maintenance work on the product.
• A dry, soft and clean cloth is sufficient for cleaning.
• Never use aggressive detergents or chemical solutions, as these could damage the metal or
impair the functioning of the product.
Disposal
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Operation
Technical data
Height .............................................................110 – 180 cm
Telescopic stand ..........................................Adjustable in 5 levels
Tube diameter ...............................................Ø35 mm (for 35 mm standard connector)
Load capacity ...............................................max. 45 kg
Material .........................................................Steel
Dimensions (W x H x D)...............................Approx. 12.5 x 92 x 12.5 cm (when folded)
Weight ............................................................Approx. 3 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE. V1_0915_02_JH