Werbung
ONE WAY WIRING / MAINS MASTER
6A
Live
Master Dimmer
C
L
L
SL
1-Way Switching
Each lighting circuit is controlled by one switch.
Connect the Live (Brown/Red) wire to the terminal marked L.
Connect the Switch Live (Blue/Black) to the terminal marked C.
For 1 way switching the middle terminal connection is not used.
Read and remove the warning label to access the Master/Slave switch.
Warning
: DO NOT operate the Master/Slave switch while the device
is powered. If you ignore this warning your device will be irreparably
damaged.
6B
OR
Master Dimmer
2-Way Switching
2-Way lighting circuits have two switches controlling the same lights from two different locations.
This is commonly used at the top and bottom of staircases or at the entry and exit doors to a room.
For 2-way switching appliations BOTH existing switches/dimmers must be replaced with Aurora Zigbee
Smart Rotary dimmers.
Remove one of the existing switches, taking note of the wiring.
Ensure that the Live (Brown or Red) wire is inserted into the terminal marked L and the Switched Live
(Blue or Black, to your lights) is inserted into the C terminal.
www.auroralighting.com
Switch on left side:
Master mode
TWO WAY WIRING / MAINS MASTER AND SLAVE
Live
C
L
L
SL
Switch on right side:
Slave mode
Slave Dimmer
C
L
L
SL
Document Version: AU-A1ZB2WDM_1P_2P_V1_18
Werbung
