Bluedio 8S6 Bedienungsanleitung

User Manual/EN
Welcome to your new Bluedlo speaker
We appreciate your choice of Bluedio speaker.
Before use, please read this user manual carefully
and keep for future reference.
Purchase verification
You can find the verification code by scraping the
coating off the security label that is affixed to the
original packaging. Enter the code on our official
website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome to visit our official website:
www.bluedio.com;
Or to email us ataftersales@bluedio.com;
Or
to
call us
at
400-889-0123.
... 1 ...
Charge and battery
1. Charging cable: Use the included charging cable
or the speakers may be damaged. (The charging
socket of the speaker is Type-C plug.)
2. Charger: If you use
a
charger for charging, its
output DC voltage should be 5V:1:0.3V, and tts output
current should exceed 1000mA.
Charge the speaker:
The built-in battery of the speaker is rechargeable
and non-detachable. Do not replace the battery.
1. Turn off the speaker before charging.
2. Connect the Type-C plug(the smaller plug) of the
charging cable to the charging socket of the
speaker; Connect the other plug to the USB socket
of your computer or other charging device.
When charging, you will see the red LED stays on.
3. When fully charged(takes about 3-4 hours), you
will see the blue LED stays on or the red LED goes
out.
.. . 3···
Using the speaker to talk (in Bluetooth
mode)
Answer a call
When there is an incoming call, press the MF button
once to answer it. Or use your mobile phone to
answer it.
End a call
When you are on call, press the MF button once to
end it. Or use your mobile phone to end it.
Reject a call
When there is an incoming call, press and hold the
MF button for
2
seconds to reject it. Or use your
mobile phone to reject it.
Voice control (need your mobile to support)
Press and hold the MF button for about 2 seconds.
Redial the last number
Press the MF button twice continuously.
.•. 5 ...
Line-in music playback
Tum off the speaker first, and then use the standard
3.5mm audio cable to connect the speaker with your
mobile phone.
If the speaker has connected with your mobile phone
via Bluelooth, ii will automatically switch to
Bluetooth mode when answering an incoming call.
Cloud function
The speaker supports Alibaba Cloud Computing and
other cloud platform. Users can download the app by
scanning the QR code on page 70.
Wake up the cloud (have installed the cloud
app on your phone)
Connect the speaker with your phone via Bluetooth;
click the doud start button and the orange LED stays
on.
... 7 ···
Bluedio
--Powerful Sound--
if
ffl
\jl,
qij ~
User Manual
8S6
Bluetooth Speaker
Speaker overview
/
orange LED
sou nd efl'ect
blue LED red LED
I
button
~
I
I
I
~ 1 © ~ QUr;ii .
-1
~ r 1-
m 1 croprlone
cloud 9tlut volume+ volume- MF button
bulllln
In the box
BluamBS8
Blueloolh~
speaker
Uaarrnanl.B Auiio cat:E
. .. 2 ···
Operation
Power on
Press and hold t he MF Button until you hear
"Power on" or you see the blue light blinks.
Power off
Press and hold t he MF Button until you hear
"Power off" .
Enter pairing mode
When the speaker is off, press and hold the MF B
until you hear "Pairing".
Pair the speaker with your mobile phone
1. Keep the distance t>etween the speaker and your
mobile phone (or other device} within 1 meter.
The closer, the better.
2. Make sure the speaker enters pairing mode.(See
instruction "Enter pairing modej
3. Switch on the Bluetooth of your mobile phone,
add/search devices.
4.
When "BS 6" appears, select ii. (If asked for
a
pass code: Enter "0000")
5. Finish.
Attention: If the pairing is not successful within 120
seconds, the blue LED will go out and the speaker is
out of pairing mode. Please repeat the pairing
procedure to try again .
. .. 4 ···
Switch phone calls:
Receiving
can
2 in Gall 1,
press the
MF button once
to
end
Gall 1 and answer Gall 2; press and hold the
MF button
to
hold on call 1 and answer Call 2.
Press and hold the MF button can switch between
Call 1 and Cell 2; press once to end the call.
Track/ Volume control (in Bluetooth mode)
Pause/Play: Press the MF button once
Previous track: Press and hold the Volume- button
for about 3 seconds
Next track: Press and hold the Volume+ button for
about 3 seconds
Volume Up: Press the Volume+ button
Volume Down: Press the Volume- button
Sound effect switching
When playing music via Bluetooth, press the sound
effect button can change the sound effect.
• .. 6 ..•
Specifications
Bluetooth version: 5.0
Bluetooth transmission frequency:
2.4GHz to 2.48GHz
Bluetooth operating range:
up to 33 feet (free space)
Bluetooth profiles: A2DP, AVRCP, HSP, HFP
Frequency response: 20Hz-20,000Hz
Audio output
power:
2*5W
Audio
input:
VRMSs1V
Standby time: 1000 hours
Music/talk time: 5 hours
Charging time: 3-4 hours for full charge
Operating temperature range:
-10 "C to 50"C only
Specifications are subject to change without notice .
. .. B ...