Explanation Of Symbols; Safety; Intended Use; Safety Instructions - Saito 10029869 Original-Gebrauchsanleitung

2.2 | Explanation of symbols

The following symbols and signal words are used in these instructions.
WARNING!
CAUTION!
IMPORTANT!

3 | Safety

3.1 | Intended use

This saito Universal Bar-end Mirror is intended as a replacement for your existing mirror and to
enhance the look of your motorcycle. It can be installed on motorcycle handlebars with a diameter of
22,2 mm or 25.4 mm, or on special bar ends designed specifically for mounting mirrors.
The saito Universal Bar-end Mirror is homologated (E-approved) and street-legal in EU countries.
It must only be used as described in these instructions. Any other use is considered improper use
and may result in material damage. The manufacturer and supplier accept no liability for damage
caused by improper or incorrect use.

3.2 | Safety instructions

WARNING!
Danger for children and persons with reduced physical, sensory or mental
abilities (e.g. partially disabled persons, elderly persons with reduced physical
and mental abilities) or lack of experience and knowledge (e.g. older children)!
• The product includes small parts and packaging which could be swallowed.
Keep these out of the reach of children, as there is a risk of asphyxiation if they
are swallowed.
CAUTION!

Risk of injury!

• When installing the mirror, ensure that the vehicle cannot topple over and that
the workplace is well lit.
10
This symbol/signal word indicates a hazard with a medium risk level
which, if not avoided, may result in death or serious injury.
This symbol/signal word indicates a hazard with a low risk level which,
if not avoided, may result in minor or moderate injury.
This signal word warns of possible material damage.
This symbol gives you useful additional information about assembly or
usage.
This symbol indicates that the packaging and product can be recycled.