Herunterladen Diese Seite drucken

Ameristep GUNNER Bedienungsanleitung Seite 5

Tarnzelt

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Thank You! for purchasing The Gunner Ground Blind
B e s u r e t o f o l l o w t h e s e g u i d e l i n e s f o r u s i n g
y o u r P r o d u c t . R E A D A N D U N D E R S T A N D A L L
I N S T R U C T I O N S a n d W A R N I N G S F I R S T
Any questions or confusion regarding the use of this
product contact our Customer Service Department.
STORAGE AND TIPS
• Store Blind in a cool dry place - free native brush, dirt and any debris
• Never store Blind wet or damp
• Avoid leaving Blind outdoors for any extended period of time. Prolonged exposure to sunlight may cause fabric to fade.
• To stop any leakage, use seam sealer on all seams and silicon spray on seams/sidewalls.
• To store your TSC windows and/or Shoot-Through Mesh (if included with Blind or purchased separately),
avoid wrinkles and creases that could significantly reduce visibility
• To aid in folding blind be sure the window curtain is all the way up and secured
CPAI-84 WARNING
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source.
This tent is made of flame-resistant fabric. It is not fireproof. The fabric will burn if left in continuos contact with a flame source. DO NOT use
candles, matches or open flames of any kind in or near a tent; DO NOT cook inside a tent; DO NOT smoke in a tent; DO NOT store flammable
liquids inside a tent; build campfires downwind and several meters away from a tent and be sure to fully extinguish campfires before leaving a
campsite or before retiring for the night; exercise EXTREME caution when using fuel-powered lanterns or heaters inside a tent and use battery
operated lanterns whenever possible; DO NOT refuel lamps, heaters or stoves inside a tent; extinguish or turn off all lanterns before going to
sleep. The application of any foreign substance to ten fabric may render flame resistant properties ineffective.
SET UP
1
Remove BLIND from case.
©2009 (rev 3/09
A m e r i s t e p ® I n c .
2
Step 1:
Hold one of 2
Step 2:
ring sets of steel.
9 0 1 T a c o m a C t . • P . O . B o x 1 8 9 • C l i o , M I 4 8 4 2 0
THE
3
Let other two pop open.
GUNNER
GROUND BLIND
Instruction and Safety Manual
4
Step 3:
Spread BLIND and stake down. High
wind tie-downs are included (if needed)
( 8 1 0 ) 6 8 6 - 4 0 3 5
w w w . a m e r i s t e p . c o m

Werbung

loading