SW-Stahl 32230L Bedienungsanleitung Seite 8

D E S C R I P T I O N
The meter is a handheld 31/2 digital multimeter for measuring DC and AC voltage, DC current,
Resistance, Diode and Transistor with battery operated.
Compact and handy, high-contrast, one-line LCD display, 19-position rotary switch.
The automatic overfl ow and polarity display provides a reliable warning which helps avoid faults.
With the temperature probe, temperatures can be measured from -20°C to +120°C.
•
Set up
•
„Hold" button
•
Measuring cable with touch protection
•
DC: 0 - 500 V
•
AC: 0 - 500 V
•
DC: 200 mA - 10 A
•
Resistance: 0 - 2 MOhm
•
Diode tester
•
Max. display: 1999
•
9V battery (in the device)
•
Multimeter for closed-circuit current testing
Fuses included:
•
Ceramic fuse: 20 mm, 5 mm diameter,
•
500 V, 500 mA
•
Ceramic fuse: 20 mm, 5 mm diameter,
•
500 V, 10 A
S A F E T Y I N S T R U T I O N S
This multimeter has been designed according to IEC −1010 concerning electronic measuring
instruments with an overvoltage category (CAT II) and pollution 2. Follow all safety and operating inst-
ructions to ensure that the meter is used safely and is kept in good operating condition.
Full compliance with safety standards can be guaranteed only with test leads supplied.
If necessary, they must be replaced with the type specifi ed in this manual.
S A F E T Y S Y M B O L S
Important safety information, refer to the operating manual. Important safety information, refer to the operating manual.
Dangerous voltage may be present Dangerous voltage may be present
Earth ground Earth ground
Double insulation (Protection class II).
Fuse must be replaced with rating specifi ed in the manual
8
32230L_manual_75030_de_en_roh.indd 8 32230L_manual_75030_de_en_roh.indd 8 24.09.20 08:18 24.09.20 08:18