Setolite SETO CLIPLIGHT ONE Gebrauchsanleitung Seite 4

Operating
Diffusion LED Mode change button
(top) (SOS flash)
Hook
USB charging port
1. Light turns on when pushing On / Off button
shortly. Repeat to turn off the light
2. When light is on, push and hold On / Off button
to adjust brightness to increase brightness. Push
and hold On / Off button once again to decre-
ase brightness. Flicker once when it reaches
Maximum / Minimum brightness.
3. When light is on, push Mode change button
shortly to change 3 different light mode (Fo-
cused light > Diffused light (front) > Diffused
light (top))
4. When light is on, push Mode change button
over 2 seconds to make SOS signal on each
mode.
© SETOLITE Lichttechnik GmbH
Alle Rechte, einschließlich Übersetzung behalten wir uns vor. Die vollständige oder teilweise Vervielfältigung ist nur mit schrift-
licher Genehmigung des Herausgebers zulässig. Die Angaben in diesem Dokument entsprechen dem technischen Stand bei
Drucklegung, Änderungen in Technik und Ausstattung, sowie Irrtümer und Druckfehler vorbehalten.
All rights, including translation, are reserved. Reproduction of any kind, for example photocopying, microfilm or data processing
equipment are forbidden without the written permission of the publisher. Reprint, also partly is forbidden. The operating
instructions reflect the current technical state of printing. Changes in technology and equipment, as well as errors and omissions
are reserved.
www.setolite.com
On / Off button (dimming
control)
Battery level
indicator
Diffusion LED
(front)
Focused LED
Optic lens
Clip
Installation color filter
To use the red light, please attach provided red
film to diffused light (front).
Cleaning and care
In order to remove dirt, dust, oil, grease, etc., use
a soft cloth that is lightly moistened with a mild
soap solution or water. Afterwards, dry it off with a
soft, dry cloth. Do not use corroding substances or
solvents for the cleaning.
Technical data
Type
Illuminant
Color temperature
Battery type / capacity
charging time
Size
Weight
Model No.
Input
SETO CLIPLIGHT ONE
LED TECHNOLOGY
Cool white
Li-Polymer 3.7V 400mAh
1 hour 30 minute
38.6 x 63.6 x 24.3mm
30g
CLP-300BK
USB 5V 1A
Rev. 1.0