HEIDENHAIN CIMCO NFS Bedienungsanleitung Seite 11

Settings at the
HEIDENHAIN iTNC (530)
Make sure that the person configuring your TNC is a network specialist.
Please note that the TNC performs an automatic restart if you change the
IP address of the TNC.
In the Programming and Editing mode of operation, press the MOD key.
Enter the keyword NET123. The TNC will then display the main screen for
network configuration.
Define net
ADDRESS
. . . . . . . . . . . . . . . . . . .
MASK
. . . . . . . . . . . . . . . . . . . . . . . . .
BROADCAST
. . . . . . . . . . . . . . .
ROUTER
. . . . . . . . . . . . . . . . . . . . .
HOST
. . . . . . . . . . . . . . . . . . . . . . . . .
DOMAIN
. . . . . . . . . . . . . . . . . . . . . .
NAMESERVER
. . . . . . . . . . . . .
Define mount
MOUNTDEVICE
. . . . . . . . . . . .
MOUNTPOINT
. . . . . . . . . . . . . .
FILESYSTEMTYP
. . . . . . . . . .
OPTIONS
. . . . . . . . . . . . . . . . . . . .
AM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TCP/IP address for the control, e.g.: 192.168.1.10
The subnet mask used by your network, e.g.: 255.255.255.0
Empty or the broadcast address, e.g.: 192.168.1.255
Empty or address of the used router, e.g.: 192.168.1.0
Empty or alias-name of the control, e.g.: NC
Empty or name of the domain of the control (reserved for SMB connection)
Empty or TCP/IP address of the DNS Server (reserved)
TCP/IP address of the NFS Server:/Export name, e.g.:
19 2.168.1.20:/NCPROG
Alias-name of the share (max. 8 characters, colon), e.g.: SERVER:
File System Type (nfs/smb), e.g.: nfs
Options depending on the File System Type (empty)
Auto Mount (0 or 1). Set at 1, the control will automatically connect using
the 'Mount' softkey.
11