Important Safety Instructions - Blue Sound Node Kurzanleitung

Important Safety Instructions
Save these instructions for later use.
Follow all warnings and instructions marked on the audio equipment.
:._Read instructions -All the safety and operating instructions should be read before the product is
operated.
_Retain Instructions -The safety and operating instructions should be retained for future reference.
_Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
_Follow Instructions- All operating and use instructions should be followed.
_Cleaning- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Clean only with a dry cloth.
_Attachments- Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
_Water and Moisture- Do not
use this product near water-for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
_Accessories - Do not place th is product on an unstable cart, stand, tripod, bracket, or table. The product
may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table reco mmended by the manufacturer, or sold with the product. Any
mounting of the product should fo llow the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
A product and cart combination should be moved with care. Quick stops,
excessive fo rce, and uneven surfaces may cause the product and cart combination
to overturn.
_Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the product on a bed, sofa, rug , or other
similar surface. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
_Power Sources -This product should be operated only from the type of power source indicated on the
marking label. If you are no t sure of the type of power supply to your home, consult your product dealer
or local power company.
The primary method of isolating the amplifier from the mains supply is to disconnect the mains plug.
Ensure that the mains plug remains accessible at all times. Unplug the AC power cord from the AC outlet
if the unit will not be used for several months or more.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
_Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
6
_Power Cord Protection - Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
_Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure
the antenna or cable system is grounded so as to provide some protection against voltage surges and
built-up static charges. Article 81D of the National Electrical Code, ANSI/NFPA 7D, provides information
with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
_Lightning - For added protection for this product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power line surges.
_Power Lines- An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits as contact with them might be fa tal.
_Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
_Object and Liquid Entry - Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
Warning
The apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vas~s, should not be placed on the app~ratus. As with any electronic products, use care not to spill
liqu1ds Into any part of the system. Liquids can cause a failure and/or a fire hazard.
_Damage Requiring Service - Unplug this pro duct from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
_When the power supply cord or plug is damaged.
_ If liquid has been spilled, or objects have fallen into the product.
_ If the product has been exposed to rain or water.
_ If the product does not operate norma lly by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal operation.
_ If the product has been dropped or damaged in any way.
_When the product exhibits a distinct change in performance-this indicates a need for service.
_ Replacement Parts -When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may resu lt in fire, electric shock, or other hazards.
_Safety Check- Upon completion of any service or repa irs to this product, ask the service techn ician to
perform safety checks to determine that the product is in proper operating condition.
7
I