Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. ElyQ Anleitungen
  4. Ferngesteuerte Modelle
  5. Competition Vision 50
  6. Benutzerhandbuch

ElyQ Competition Vision 50 Benutzerhandbuch

Vorschau ausblenden
Diese Anleitung herunterladen
Ely
Q
USER MANUAL
MANUALE D'USO
BENUTZER HANDBUCH
MANUEL D'UTILISATION
Competition
Downloaded from
www.Manualslib.com
manuals search engine
loading

Inhaltszusammenfassung für ElyQ Competition Vision 50

  • Seite 1 USER MANUAL MANUALE D’USO BENUTZER HANDBUCH MANUEL D'UTILISATION Competition Downloaded from www.Manualslib.com manuals search engine...
  • Seite 2 R/C. elicotteri R/C. Pflicht einer Modellflug-Haftpflichtversicherung. Eine ElyQ does not assume the liability for the use and / or private Haftpflichtversiche rung ist nicht ausreichend. S'il s'agit du premier hélicoptère R/C que vous réalisez. misuse of the model.
  • Seite 3 Muffler (.50) 600/620 Blades Engine Starter Transmitter 6ch or more Heli Engine (.50) Receiver (6ch or more) 1x set Helicopter System ElyQ - Voltage Regulator 7.4V-1.5A/2A Lipo Battery Glow Starter 12V Battery Fuel Pump Fuel Pitch Gauge Glow Plug Wrench Recommended Tools required for assembly - Attrezzi richiesti per l’assemblaggio - Benötigte Werkzeuge für die Montage - Outils nécessaires pour l'assemblage...
  • Seite 4 BAG EQ3000 Fuel Tank Assy (Bag EQ3000) (Bag EQ3000) (Bag EQ3000) (Bag EQ3000) Fuel Tank Assembly Fuel Tank Assembly Fuel Tank Assembly Fuel Tank Assembly The fuel tank comes assembled from the Questa parte viene fornita già Dieses Teil wird bereits montiert Cet ensemble est fourni déjà...
  • Seite 5 BAG EQ3000 Fuel Tank Assy Preview 8003100A Fuel tank stopper 8004400A Fuel tank nipple 8010900A Fuel tank (V50c) 8011000A Silicon fuel tube L=80mm d2.5, D6 8103600A Fuel Clunk 8402000A Fuel Tank Assy S001-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 6 BAG EQ3001 Guide Pulley Assy (Bag EQ3001) (Bag EQ3001) (Bag EQ3001) (Bag EQ3001) Guide Pulley Assy Guide Pulley Assy Guide Pulley Assy Guide Pulley Assy Insert the PIN (3) in the Guide Pulley (2) Inserire il PIN (3) nel relativo cuscinetto Setzen Sie den PIN (3) in das Lager des Introduire le PIN (3) dans le coussinet bearing and locking them symmetrically...
  • Seite 7 BAG EQ3001 Guide Pulley Assy Preview Item Code Description Q.ty 8004000A Pulley collar 8004100A Guide pulley with bearing d3, D10, W4 8103800A Pin Ø 3x17.75 8400800A Guide pulley assy S002-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 8 BAG EQ3009 Main Frame Assembly (Part 01) (Bag EQ3009) (Bag EQ3009) (Bag EQ3009) (Bag EQ3009) Main Frame Assembly (Part 01) Main Frame Assembly (Part 01) Main Frame Assembly (Part 01) Main Frame Assembly (Part 01) Make up the assy according to the Eseguire il montaggio secondo lo Führen Sie die Montage nach dem Exécuter le montage selon le schéma.
  • Seite 9 BAG EQ3009 Main Frame Assembly (Part 1.00) Lock Nut M2.5 (x2) Glue width: approx. 1mm Lock Nut M3 (x2) Washer d3,D8,W1.5 (x12) Socket screw M2x4 (x2) Socket screw M3x6 (x29) Item Code Description Q.ty 8109300B Landing Skid Brace Mount (V50c) Socket screw M2.5x8 (x6) 8108000A Tail Pulley Housing (V50c) 8109400A Tail Boom Clamp (V50c)
  • Seite 10 BAG EQ3009 Main Frame Assembly (Part 1.01) Lock Nut M2.5 (x2) Glue width: approx. 1mm Lock Nut M3 (x2) Washer d3,D8,W1.5 (x12) Socket screw M2x4 (x2) Socket screw M3x6 (x29) Socket screw M2.5x8 (x6) Socket screw M3x8 (x12) Socket B.H. screw M3x8 (x8) Socket screw M3x22 (x8) Socket screw M3x38 (x2) Preview (V50 Competition)
  • Seite 11 BAG EQ3009 Main Frame Assembly (Part 1.02) Lock Nut M2.5 (x2) Lock Nut M3 (x2) Glue width: approx. 1mm Washer d3,D8,W1.5 (x12) Socket screw M2x4 (x2) Socket screw M3x6 (x29) Socket screw M2.5x8 (x6) Socket screw M3x8 (x12) Socket B.H. screw M3x8 (x8) Socket screw M3x22 (x8) Socket screw M3x38 (x2) Preview (V50 Competition)
  • Seite 12 BAG EQ3003 Clutch Bell Assy (Bag EQ3003) (Bag EQ3003) (Bag EQ3003) (Bag EQ3003) Clutch Bell Assy Clutch Bell Assy Clutch Bell Assy Clutch Bell Assy Make up the assy according to the drawing. Eseguire il montaggio seguendo lo schema. Führen Sie die Montage nach dem Schema Exécuter le montage en suivant le schéma.
  • Seite 13 BAG EQ3003 Clutch Bell Assy (Part 1.00) Glue width: approx. 1mm Not included Epoxy Not included Epoxy Liner Mount Tool Preview Item Code Description Q.ty 8100100B Clutch bell 8100200A Starter shaft 8103000B Drive Gear - Pinion 11T with nut 8204100A Washer d8, D12, W1 8601000A Bearing d6,D13,W5 8002900B Clutch liner Liner Mount Tool...
  • Seite 14 BAG EQ3003 Clutch Bell Assy (Part 1.01) Glue width: approx. 1mm Preview Item Code Description Q.ty 8100000A Starter HEX Adapter 8204600A Set Screw M4x4 S005-3 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 15 NOTES: S005-4 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 16 BAG EQ3002 Landing Skid Assy (Bag EQ3002) (Bag EQ3002) (Bag EQ3002) (Bag EQ3002) Landing Skid Assy Landing Skid Assy Landing Skid Assy Landing Skid Assy Insert the skid pipe (3) in the Setzen Sie die Rohre (3) in den Introduire les tubes (3) dans les trous Inserire i tubi (3) nei fori relativi dei corresponding holes of the Landing gear Landing gear strut (2).
  • Seite 17 BAG EQ3002 Landing Skid Assy (Part 1.00) Set Screw M4x4 (x4) Preview Item Code Description Q.ty 8003500A Skid pipe end cap 8007800A Skid Brace 3D - V50 8103700A Landing gear skid pipe 8204600A Set screw M4x4 S006-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 18 BAG EQ3002 Landing Skid Assy (Part 1.01) Glue width: approx. 1mm Socket screw M3x16 (x4) Preview Item Code Description Q.ty 8203800A Socket Screw M3x16 8006200A Antenna Tube S006-3 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 19 BAG EQ3010 Main Frame Assembly (Part 2.00) Glue width: approx. 1mm Selftapping screw 2x8 (x2) Selftapping screw 3x12 (x6) Socket screw M3x6 (x2) Preview (V50 Competition) Item Code Description Q.ty 8109200A Canopy Mounting (V50c) 8010500A Antirotation (V50c) 8205200A Socket Screw M3x6 8202500A Self Tapping Screw 2x8 8010100A Radio Tray (V50c) 8200000A Self Tapping Screw 3x12...
  • Seite 20 BAG EQ3004 Cooling Fan Assy (Bag EQ3004) (Bag EQ3004) (Bag EQ3004) (Bag EQ3004) Cooling Fan Assy Cooling Fan Assy Cooling Fan Assy Cooling Fan Assy Eseguire il montaggio seguendo lo schema. Exécuter le montage en suivant le schéma. Führen Sie die Montage nach dem Schema aus. Make up the assy according to the Come prima operazione fissare la ventola drawing.
  • Seite 21 BAG EQ3004 Cooling Fan Assy Glue width: approx. 1mm Fig. 1 Non montare Do not mount Nicht montieren Ne pas monter Socket Screw M4x8 (x2) Engine not included Socket button head screw M3x6 (x3) Preview Item Code Description Q.ty 8010000A Fan V50c 8401000A Clutch assy 8100400B Fan HUB 8202300A Socket screw M4x8...
  • Seite 22 BAG EQ3004 Engine Mount Assy (Bag EQ3004) (Bag EQ3004) (Bag EQ3004) (Bag EQ3004) Engine Mount Assy Engine Mount Assy Engine Mount Assy Engine Mount Assy Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le drawing.
  • Seite 23 BAG EQ3004 Engine Mount Assy Glue width: approx. 1mm Engine not included Socket screw M3x14 (x8) Preview Item Code Description Q.ty 8108500A Motor Mount Side (V50c) 8200900A Socket screw M3x14 S009-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 24 BAG EQ3004-10 Main Frame Assembly (Part 2.01) Glue width: approx. 1mm Washer d3,D8,W1.5 (x4) Socket screw M3x14 (x4) Self Tapping screw M2.5x12 (x6) Preview Item Code Description Q.ty 8203700A Self Tapping Screw 2.5x12 8200900A Socket Screw M3x14 8201200A Flat Washer d3, D8, W1.5 8010200B Engine Fan Conveyor S009-3 Vision 50 - Competition / Italy 13-05-2009...
  • Seite 25 BAG EQ3004-10 Main Frame Assembly (Part 2.02) S009-4 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 26 BAG EQ3005 Tail Unit Assy (Bag EQ3005) (Bag EQ3005) (Bag EQ3005) (Bag EQ3005) Tail Unit Assy Tail Unit Assy Tail Unit Assy Tail Unit Assy Eseguire il montaggio seguendo lo schema. Führen Sie die Montage nach dem Schema Make up the assy according to the Exécuter le montage en suivant le Le parti che richiedono attenzione sono il aus.
  • Seite 27 Bag EQ3005 Tail Unit Assy Large Internal Diameter Small Internal Diameter always go toward the always go toward the Blade tail Rotor HUB Check page S025 for your release Glue width: approx. 1mm Item Code Description Q.ty 1 8107400B Tail Pulley Flange (Metal) 2 8107500B 8107500B+8107900B Tail Pulley (Metal) 3 8001200B Tail pitch control lever 4 8001300B Tail housing (L)
  • Seite 28 BAG EQ3006 Tail Support Rod Assy (Bag EQ3006) (Bag EQ3006) (Bag EQ3006) (Bag EQ3006) Tail Support Rod Assy Tail Support Rod Assy Tail Support Rod Assy Tail Support Rod Assy Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le drawing.
  • Seite 29 BAG EQ3006 Tail Support Rod Assy Ø 1.5mm Epoxy Ø 1.5mm Epoxy Selftapping screw 2x8 (x4) Item Code Description Q.ty 8106600A Tail Support Rod End (Metal) 8008100A Carbon Fiber Tail Support Rod d4,D6,W490 8202500A Self tapping screw 2x8 S011-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 30 BAG EQ3007-22 Tail Assy (Bag EQ3007 - EQ3021) (Bag EQ3007 - EQ3021) (Bag EQ3007 - EQ3021) (Bag EQ3007 - EQ3021) Tail Assy Tail Assy Tail Assy Tail Assy Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le drawing.
  • Seite 31 BAG EQ3007-21 Tail Assy Lock Nut M3 (x4) Washer d3,D8,W1.5 (x4) Socket screw M3x14 (x2) Item Code Description Q.ty 8000800A Tail control guide Selftapping screw 3x12 (x4) 8002200A Horizontal fin clamp lower 8002300A Horizontal fin clamp upper 8002500A Horizontal Stabilizer CF Socket screw M3x30 (x3) 8002600A Vertical Stabilizer CF Preview...
  • Seite 32 BAG EQ3008 Main Frame Assembly (Part 3.00) (Bag EQ3008) (Bag EQ3008) (Bag EQ3008) (Bag EQ3008) Main Frame Assembly (Part 01.2) Main Frame Assembly (Part 01.2) Main Frame Assembly (Part 01.2) Main Frame Assembly (Part 01.2) Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le...
  • Seite 33 BAG EQ3008 Main Frame Assembly (Part 3.00) Lock Nut M3 (x2) Socket screw M3x14 (x2) Selftapping screw 3x12 (x2) Ø 2mm Preview Item Code Description Q.ty 8005100A Tail Rotor Blade 8200900A Socket screw M3x14 8200400A Lock nut M3 8200000A Self tapping screw 3x12 S013-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from...
  • Seite 34 BAG EQ3011 Main Drive Gear Assembly (Bag EQ3011) (Bag EQ3011) (Bag EQ3011) (Bag EQ3011) Main Drive Gear Assembly Main Drive Gear Assembly Main Drive Gear Assembly Main Drive Gear Assembly Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le drawing.
  • Seite 35 BAG EQ3011 Main Drive Gear Assembly Glue width: approx. 1mm One Way Auto Rotation Assy Socket screw M3x8 (x4) Preview Item Code Description Q.ty 8109900A One Way Housing with Logo (V50c) 8110000A One Way Shaft (V50c) 8600700A One way bearing d14, D20,W16 8110100A OneWay Shaft Collar (V50c) 8602300A Bearing d15, D21, W4 8201800A Socket Screw M3x8...
  • Seite 36 Main Frame Assy (Part 3.01) BAG EQ3012 (Bag EQ3012) (Bag EQ3012) (Bag EQ3012) (Bag EQ3012) Main Frame Assy (Part 02. 1 ) Main Frame Assy (Part 02. 1 ) Main Frame Assy (Part 02. 1 ) Main Frame Assy (Part 02. 1 ) Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem...
  • Seite 37 Main Frame Assy (Part 3.01) BAG EQ3012 Glue width: approx. 1mm Lock Nut M3 (x1) Set Screw M4x4 (x2) Socket Screw M3x20 (13+7) (x1) Preview Item Code Description Q.ty 8109800A Main Shaft (V50c) 8100800A Main Shaft Collar 8204600A Set screw M4x4 8203400A Socket Screw M3x20 (13+7) 8200400A Lock Nut M3 S015-2...
  • Seite 38 BAG EQ3013 Mixing Lever Assy (Bag EQ3013) (Bag EQ3013) (Bag EQ3013) (Bag EQ3013) Mixing Lever Assy Mixing Lever Assy Mixing Lever Assy Mixing Lever Assy Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le drawing.
  • Seite 39 BAG EQ3013 Mixing Lever Assy Glue width: approx. 1mm Preview Item Code Description Q.ty 8101900A Collar d3, D4, W10 8104400A Ball type E M2x4 - 2.75 mm 8601100A Bearing d4, D7, W2.5 8106500A Mixer Lever Metal V50 S016-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 40 BAG EQ3014 Main Rotor Pitch Assy (Bag EQ3014) (Bag EQ3014) (Bag EQ3014) (Bag EQ3014) Main Rotor Pitch Assy Main Rotor Pitch Assy Main Rotor Pitch Assy Main Rotor Pitch Assy Führen Sie die Montage nach dem Schema Make up the assy according to the Eseguire il montaggio seguendo lo Exécuter le montage en suivant le aus.
  • Seite 41 BAG EQ3014 Main Rotor Pitch Assy Large Internal Diameter Small Internal Diameter Large Internal Diameter Small Internal Diameter always go toward the always go toward the Blade always go toward the always go toward the Blade main Rotor HUB main Rotor HUB Glue width: approx.
  • Seite 42 (logo direction; the symbol must be faced Einsetzrichtung; das Symbol muss nach Les Ball Link (12) ont une direction ElyQ) deve essere posizionato verso externally (please see fig. 1). außen zeigen (siehe Abb. 1 ). d'insertion; le symbole doit être l'esterno (vedi fig.
  • Seite 43 BAG EQ3015-21 Main Rotor Head Assy (Part 1.00) Fig. 1 Glue width: approx. 1mm Item Code Description Q.ty 8100600A Spindle 8109600B Control FlyBar (V50c) 8204000A Socket screw M3x18 8110200A Control Flybar Rod V50c 8102300B Flybar see saw lever 0.00 Main Rotor Pitch Assy 8109500C Center Hub (V50c) 8010700A Flybar Guide (V50c) 8109700A Head Stop (V50c)
  • Seite 44 BAG EQ3015-21 Main Rotor Head Assy (Part 1.01) Glue width: approx. 1mm Preview Set Screw M3x4 (x2) Socket screw M2x4 (x16) 190.5 190.5 Set Screw M4x4 (x1) 27.50 27.50 S018-3 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 45 NOTE Flybar Collar Flybar Collar Non serrare il Flybar Collar tra il Seesaw Lever e il Control Flybar Rod. Importante: questo componente deve essere libero di ruotare intorno alla flybar. Do not tighten the Flybar Collar between Seesaw Lever and Control Flybar Rod. Important: this component must freely rotate around the flybar.
  • Seite 46 BAG EQ3016 Swash Plate R0.04 Assy (Bag EQ3016) (Bag EQ3016) (Bag EQ3016) (Bag EQ3016) Swash Plate R0.04 Assy Swash Plate R0.04 Assy Swash Plate R0.04 Assy Swash Plate R0.04 Assy This set comes assembled from the Questo componente viene fornito già Dieses Teil wird bereits montiert Cet ensemble est fourni déjà...
  • Seite 47 BAG EQ3016 Swash Plate R0.04 Assy Glue width: approx. 1mm This set comes assembled from the factory. Questo componente viene fornito già assemblato. Dieses Teil wird bereits montiert geliefert. Cet ensemble est fourni déjà assemblé. Preview Item Code Description Q.ty 8103900B Swash plate upper Rel.B 8104000C Swash plate lower Rel.C 8104100A Ball type B M3x3 - 3,75 mm...
  • Seite 48 BAG EQ3017 Main Rotor HUB & Servo Rear Drive (Bag EQ3017) (Bag EQ3017) (Bag EQ3017) (Bag EQ3017) Main Rotor HUB & Servo Rear Drive Main Rotor HUB & Servo Rear Drive Main Rotor HUB & Servo Rear Drive Main Rotor HUB & Servo Rear Drive Eseguire il montaggio seguendo lo Make up the assy according to the Führen Sie die Montage nach dem...
  • Seite 49 BAG EQ3017 Main Rotor HUB & Servo Rear Drive Glue width: approx. 1mm Epoxy Flat Washer d3,D5,W0.5 (x1) Lock Nut M3 (x1) Check page S025 for your release Socket screw M2x4 (x2) Socket screw M3x14 (x1) Socket Screw M3x20 (13+7) (x1) Item Code Description...
  • Seite 50 Main Rotor Blades BAG EQ3018 (Bag EQ3018) (Bag EQ3018) (Bag EQ3018) (Bag EQ3018) Main Rotor Blades Main Rotor Blades Main Rotor Blades Main Rotor Blades Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le drawing.
  • Seite 51 Main Rotor Blades BAG EQ3018 Blades not included D=20mm A=55mm B=80mm C=86mm A - L = 55mm B - L = 80mm C - L = 86mm D - L = 20mm Lock Nut M4 (x2) Socket Screw M4x27 (17+10) (x2) Preview Item Code...
  • Seite 52 (see fig. 1). außen gerichtet sein (s. Abb. 1). vers l'extérieur (voir fig. 1 ). (logo ElyQ) deve essere posizionato verso l'esterno (vedi fig. 1 ). If this is the first R/C helicopter you are Wenn es sich um Ihren ersten S'il s'agit du premier hélicoptère R/C que...
  • Seite 53 Servo Installation (Part 1.00) BAG EQ3018 19.5 PITCH AILERON 13.5 Glue width: approx. 1mm TAIL ELEVATOR 19.5 Ball Type E M2x4 - 2.75 (x6) TRHOTTLE 13.5 Nut M2 (x6) Socket Screw M2.5x12 (x8) Self Tapping Screw 2.5x16 (x12) Item Code Description Q.ty 8203000A Nut M2...
  • Seite 54 Servo Installation (Part 1.01) BAG EQ3018 19.5 19.5 19.5 19.5 13.5 AILERON ELEVATOR ELEVATOR PITCH TAIL 13.5 46.00 8010400A Servo Mount (V50c) TRHOTTLE 39.00 S022-3 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 55 NOTES: S022-4 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 56 BAG EQ3019 Canopy (Bag EQ3019) (Bag EQ3019) (Bag EQ3019) (Bag EQ3019) Canopy Canopy Canopy Canopy Make up the assy according to the Eseguire il montaggio seguendo lo Führen Sie die Montage nach dem Exécuter le montage en suivant le drawing. schema.
  • Seite 57 BAG EQ3019 Canopy Preview Item Code Description Q.ty 8003700A Canopy Clip Internal 8004300A Rubber Grommets 8003800A Canopy Clip External 8200000A Self Tapping screw 3x12 8005900B Canopy Fiber Glass V50 Ultimate (White) S023-2 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 58 Fuel Tube and Muffler Setting Muffler not included Fuel Filter not included S024 Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 59 Servo Setting and Adjustment Aileron Elevator Throttle Rudder Pitch PITCH: CH6 ELEVATOR: CH2 AILERON: CH1 Hitec - Futaba RX System GYRO Ch6 - Pitch Ch5 - Gyro Gain Ch4 - Rudder 6 channel Ch3 - Throttle Ch2 - Elevator 46.00 Ch1 - Aileron Throttle Rudder...
  • Seite 60 Servo Setting and Adjustment Pitch Elevator Aileron Battery LiPo 2s Programmable Output 5V/6V/7.2V/By-Pass sensor Throttle 5V Output Rudder (Fixed) GYRO Remote Switch Futaba - 2.4GHz RX System Vision 50 - Competition / Italy 13-05-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 61 Spare Parts Vision 50 - Competition / Italy 03-09-2009 EQ30004 C.F. Main Frame 2mm (V50c) EQ30005 C.F. Side Plate Set 2mm (V50c) EQ10367 Fan V50c (Carbon Reinf.) EQ30006 Body Retaining Holders (V50c) EQ30007 Radio tray (V50c) EQ30008 Engine Fan Conveyor (V50c) EQ30009 C.F.
  • Seite 62 Spare Parts Vision 50 - Competition / Italy 03-09-2009 EQ30031 Frame Spacer Smaller (V50c) EQ30032 Bottom Reinforcement Block (V50c) EQ30034 Main Rot. Brg Support d10,D22,W6 (V50c) EQ30035 Brg d8,D19,W6 Support (V50c) EQ30036 Brg d6,D15,W5 Support (V50c) EQ30033 Main Shaft (V50c) M3x8 M2x4 M3x38...
  • Seite 63 Spare Parts Vision 50 - Competition / Italy 03-09-2009 EQ2056-V2 Carbon Tail Boom Brace Set EQ0382 Flap Dampers 90° (Progressive) EQ0506-UP Clutch Bell EQ0518 96T Main Spur Gear EQ0518-P Drive Gear Pinion 11T with Nut EQ0030 SUS Tail Rotor Shaft EQ0027-UP Carbon Reinforce Tail Case EQ0239 Canopy Clip set EQ0016 Tail Pitch Control Lever...
  • Seite 64 Spare Parts Vision 50 - Competition / Italy 03-09-2009 EQ2012 Bearing d4, D7, W2.5 EQ2013 Starter Brg d8,D19,W6-d6,D15,W5 EQ2014 Bearing d6, D13, W5 EQ2015 Thrust Bearing d6,D12,W4.5 EQ2010 Main Shaft Brg d10, D22, W6 EQ2011 Bearing d3, D6, W2.5 EQ2015-T Thrust Bearing d5,D10,W4 EQ2016 Bearing d6, D10, W3 EQ2017 Bearing d5, D10, W4 EQ2018 Bearing d5, D11, W5...
  • Seite 65 Spare Parts Vision 50 - Competition / Italy 17-10-2009 EQ2055 Plastic Canopy V50 EQ2074 Plastic Canopy Cover V50 EQ2071-P Tail Rotor Bell Crank (Plastic) EQ2058-P Front Servo Tail Set (Plastic) EQ1020 Mixing Lever EQ0038 Carbon Reinforced Tail Fin EQ0312 Header Tank Spare Bracket EQ10363 C.F.
  • Seite 66 Vision 50c 1.01 Version Angular Bearing Black side Socket screw M3x8 (x2) Red side Glue width: approx. 1mm Black side Red side Item Code Description Q.ty Red side Black side 8201800A Socket Screw M3 x 8 8205900A Flat Washer d5, D8, W0.5 Warning: 8602600A Angular Bearing d5, D10, W4 Controllare l’...
  • Seite 67 Vision 50c 1.01 Version Vision 50 - Competition / Italy 03-08-2009 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 68 Strada di Oselin, 39 - Remanzacco (UD) / ITALY domande più comuni sono reperibili sul nostro sito Web Tel. +39 (0432) 66.70.35 r.a. di Assistenza tecnica. Fax +39 (0432) 64.93.78 Http://www.elyq.com e-mail: info@elyq.com Stampato in China CHINA HINWEIS: G/F shop 1. no.30 Ha Heung Road Tok Zusätzliche Informationen über dieses Produkt und...