Technical Specifications - Simonsvoss Locknode Srel2.G2 Kurzanleitung

3. Technical specifications

5. Insert the LockNode into the base as shown.
6. Press the adhesive surface firmly onto the SmartRelay 2
circuit board.
7. Replace the cover.
8. Reconnect the power supply.
9 SmartRelay 2 flashes four times.
LockNode is mounted and the lock can be
9
networked.Re-insert the power plug.
3. Technical specifications
Dimensions 45 mm × 17 mm × 5 mm
20 / 84 | EN