Introduction; Product Definition; Intended Use - AWG Alco Power Fighter APF 3C HH Betriebsanleitung

Seite 5/36 AWG | Instructions manual | Alco Power Fighter Manual Monitors
1

INTRODUCTION

The product Alco Power Fighter Manual Monitors was manufactured in compliance with all rel-
evant directives.
The following directives were applied:
2014/68/EU
The product Alco Power Fighter Manual Monitors was designed and constructed under applica-
tion of harmonised .
The following harmonised standards were applied:
EN ISO 12100:2010-11
EN 13565-1:2016
EN 13565-2:2009
DIN 33411-3:1986-12
1.1
The product Alco Power Fighter Manual Monitors is a partly completed machine as defined by
European Directive 2006/42/EC, Articles 1g and 2g.
1.2
The product Alco Power Fighter Manual Monitors is intended exclusively for:
Application of extinguishing agents.
The product may only be used within the framework of firefighting operations, by related
auxiliary services or in industrial applications.
Any use above and beyond this is deemed improper use.
The product corresponds to the technical state-of-the-art and complies with the recognised rules
of safety engineering. Nevertheless, its use may give rise to hazards for the operator or third
parties, damage to the product itself or to other material assets.
The product may only be used in technically perfect condition, for its intended purpose and with
due awareness of the safety risks and hazards involved.
Intended use also includes
•
•
•
•
Directive 2014/68/EU of the European Parliament and of the Council of
15 May 2014 on the harmonisation of the laws of the Member States
relating to the making available on the market of pressure equipment

Product definition

Intended use

reading this manual and following all instructions contained therein, in particular the safety
information
compliance with other applicable documents
compliance with the maintenance requirements
the immediate remedying of malfunctions
Safety of machinery - General design principles -
Risk assessment and risk reduction
Fixed firefighting systems - Foam systems
Part 1: Requirements and test methods for components
Stationary fire-fighting systems - foam extinguishing systems
Part 2: Planning, installation and maintenance
Human physical strength;
maximum static action moments applied by male
operators when actuating hand-wheels
Introduction