Care And Cleaning Information; Safety Instructions - Konig + Neurath ACTA.PLUS Montageanleitung

Care and cleaning information

Plastic-coated surfaces:
Clean the surface with a duster. Use warm water and / or a mild plastic cleaner to
remove marks, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent visible damage.
Natural wood finishes:
Wipe the surface with a duster. Use a damp cloth and a neutral cleaning agent to
remove soiling, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent visible damage.
Avoid direct exposure of the natural wood finish to high temperatures and moisture.
Please note that the natural wood finish can change colour over time if exposed to
UV rays. This is a natural ageing process of the wood.
No liability is accepted for damage to the finish caused by incorrect cleaning.

Safety instructions

Align pull-out sidefiler, as discribed in Fig.1
Use only the handle when operating the pull-out sidefiler
Before moving the pull-out sidefiler, remove contents and look
front; tape front where necessary.
Pull-out sidefiler with charging point:
Make sure that no liquid enters the power socket!
Pull-out sidefiler with cable pass-through :
Make sure that the cables are not crushed.
18