ASROCK Z590 Extreme Handbuch Seite 46

Step 3
Depending on the PCB type and
length of your M.2_SSD (NGFF)
2
module, find the corresponding nut
location to be used.
Step 4
Prepare the M.2 standoff that comes
with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
and gently insert the M.2 (NGFF)
C B A
20
o
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
C B A
Step 5
Tighten the screw that come with the
package with a screwdriver to secure
the module into place.
C
NUT2 NUT1
42