Yealink UVC20 Kurzanleitung Seite 3

• Put on a Flat Surface
• Adjusting the Camera Tilt
LED Indicator Instructions
LED indicators on the UVC20:
LED Status
Off
Flashing green
Solid green
Solid red
Flashing orange The UVC20 is upgrading firmware.
Flashing red
The UVC20 is not properly connected to the PC.
There is an incoming call in the client.
The UVC20 is active.
The UVC20 is muted.
The UVC20 is in recovery mode and the firmware has
not been upgraded.
• Mount on a tripod
Description
E
N
G
L
I
S
H
2