® ® ® ® Knürr DI-STRIP TriplePower Knürr DI-STRIP TriplePower DEUTSCH ENGLISH Montage direkt am Rahmen Installation directly to the frame Notwendiges Werkzeug Tools required – Phillips-Schraubendreher Nr. 2 – Phillips screwdriver no. 2 Befestigungssatzinhalt Content of the mounting kit –...
Seite 3
® ® ® ® Knürr DI-STRIP TriplePower Knürr DI-STRIP TriplePower DEUTSCH ENGLISH Max. 5,2 Nm Montage mittels Befestigungswinkels Installation using mounting bracket for für 1 oder 2 PDUs 1 or 2 PDUs (Bestell-Nr. 01.147.813.9) (order no. 01.147.813.9) diesem Befestigungswinkel können zwei DI-STRIP With this mounting bracket it is possible to install two DI-STRIP...
Seite 4
® ® ® ® Knürr DI-STRIP TriplePower Knürr DI-STRIP TriplePower DEUTSCH ENGLISH Montieren Installation 1. Federmuttern M6 in die T-Nuten der Profile einstecken 1. Insert spring nuts M6 in the T-slots in the extrusions 2. Montagewinkel mittels zwei Zylinderschrauben 2. Attach supplied mounting bracket to the frame by using two Zahnscheiben am Rahmen befestigen cylinder screws with toothed washers Max.
Seite 5
® ® ® ® Knürr DI-STRIP TriplePower Knürr DI-STRIP TriplePower DEUTSCH ENGLISH 4. Die Geräte mittels Linsenschrauben am Winkel befestigen 4. Attach the devices to the bracket by using lens head screws Max. 5,2 Nm Andere Montagemöglichkeiten - Platzeinsparung im Other mounting options - space savings in the rack Schrank Rack PDUs Mounting Options...
Seite 6
® ® ® ® Knürr DI-STRIP TriplePower Knürr DI-STRIP TriplePower DEUTSCH ENGLISH Montage mittels PDU-Brackets Installation using PDU bracket PDU-Bracket gehört zum Schrankzubehör und ist optional PDU belongs to the rack accessories and can be ordered as an bestellbar (Bestell-Nr. 01.147.816.8 für Schrank H2000, bzw. option (order no.
Seite 7
Knürr DI-STRIP TriplePower DEUTSCH ENGLISH ® ® Montage von zwei DI-STRIP TriplePower nebeneinander Installation of two DI-STRIP TriplePower side by side Notwendiges Werkzeug Tools required – Phillips-Schraubendreher Nr. 2 – Phillips screwdriver no. 2 – Gabelschlüssel Nr. 8 – Open-end wrench no. 8 –...