Assembling The Bed - Quax STRETTO 540136 Serie Montageanleitung

STRETTO
Quax
First dreams First dreams
®
First steps First steps

5. Assembling the bed

Step 1 : Use both head- and back panels B and C, the longitudinal sides A, eight wooden dowels 3, eight con-
nectors 1 and eight eccentrics 2
Push the wooden dowels (3) into the provided openings on the ends of the long sides (A). Push the eccentrics (2)
into the provided openings on the innerside of the long sides. Fix the connectors (1) in the drillings of the head
and back panels (B and C). Push the long sides with their dowels into the drillings and over the connectors of the
headpanel (B) and tighten the eccentrics. Push the back panel (C) with its connectors into the drillings and over
the wooden dowels of the longitudinal sides and tighten the eccentrics.
24
Eenpersoonsbed met bodem
54 01 36xxxx
Einzelbett mit Boden
Lit simple avec fond
Single bed with bottom
Step 2 : Use the parts of steps 4.2 and
5.1, six cylindrical nuts 5 and six bolts 4
Turn the assembled wooden structure
on its side. Push the cylindrical nuts
(5) in the provided openings on the in-
nerside of the end sides and place the
metal frame in front of the drilings. Use
a magnetized screwdriver to fi x the bolts
(4) through the holes in the chassis and
into the wooden frame.