Using The Auxiliary Input; Using The Sleep Timer - PURE Contour i1 Air Bedienungsanleitung

Using the auxiliary input

Connecting an auxiliary device
Connect the line out or headphone socket of your auxiliary device to the Aux In
socket on your Contour using a suitable cable.
Selecting the auxiliary input
Press Source until Aux is displayed on the screen.

Using the sleep timer

The sleep timer switches Contour into standby after a number of minutes has
elapsed.
Setting the sleep timer
1. Press the Sleep button.
2. Press the < > buttons to specify the duration of the sleep timer from 15 to 90
minutes.
2. Push Select, or wait to start the sleep timer.
The
Tip: Push the Sleep button again at any time to view the time remaining.
Cancelling the sleep timer
Press the Sleep button and set the timer duration to OFF.
16
Downloaded from www.Manualslib.com
icon on the screen indicates when the sleep timer is set.
manuals search engine
Wi-Fi
12V DC Setup Aux In
Ethernet