Setup - Axis Communications T90A 4 Serie Installationsanleitung

Page 6 AXIS T90A Installation Guide

Setup

Follow these instructions to set up the illuminator.
1. It is recommended that you set the illuminator up at night.
2. Adjust the illumination vertically so you light up the target area.
3. Adjust the illumination horizontally via Adaptive Illumination to match illumination to the
camera's field of view.
4. Tighten all connections.
Target
CAUTION: Do not fully loosen bolt
Match illumination to camera's field of view
Camera
Light
Camera
Light
Camera
Light