Renkforce 1491408 Bedienungsanleitung Seite 2

Operating instructions
Bluetooth USB Stick 4.0 + EDR
®
Item no. 1491408
Intended use
The Bluetooth stick is intended to be connected to a computer's USB port (or a USB hub
®
connected to the computer) to establish radio connection with other suitable bluetooth devices.
For safety and approval purpose, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire etc. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Bluetooth USB Stick
®
• CD with driver/software
• Operating instructions
Up-to-date operating instructions
Download up-to-date operating instructions via the link www.conrad.com/downloads or scan
the displayed QR code. Follow the instructions on the website.
Features
• USB connection, mind. USB2.0
• LED (flashes during data transfer)
• Class II EDR, 10 m max. range (free-field)
Symbol explanation
The exclamation mark symbol indicates important parts of the operating instructions,
which are to be observed at all times.
The arrow symbol indicates special hints and operating information.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical support centre or consult a professional.
Installation of driver/software
Do not connect the bluetooth stick yet! The supplied software has to be installed
first. Proceeding differently can prevent the bluetooth stick from being recognized
correctly, or can cause the software not to function correctly.
• Place the CD in the appropriate drive of your computer. If the installation software does not
start automatically, start it manually from the main directory of the CD. Follow all the software
instructions (it may be necessary to restart the computer).
• After finishing the software installation, connect the Bluetooth
USB3.0/USB3.1 port on your computer. With the software, it is now possible to search for
Bluetooth devices.
®
Tips & Notes
• In DOS and Window's safe mode, the USB interface will not work (or is limited to enabling
continued use of mouse/keyboard). The Bluetooth
• The stated range of up to 10 m is the free-field range, i.e. the range with sight contact
between the transmitter and the receiver (one Bluetooth
operation, however, there are walls, room ceilings, metal objects etc. between the transmitter
and the receiver, which reduces the range accordingly.
• Other causes for a reduction in range are:
- High-frequency interference of all types (computers, monitors, mobile phones)
- Buildings of all types and vegetation
- Conductive metals, in the vicinity of the units, or within or close to the radio path, e.g.
radiators, metal insulation, glass windows, reinforced concrete floors etc.
- Influences on the aerial's transmission characteristics, due to the distance of the transmitter
or receiver from conductive areas or objects (including the human body or floor).
- Broadband interference in urban areas that reduces the signal-to-noise ratio; the signal is
not recognised because of the „noise".
- Irradiation from insufficiently shielded electronic devices, e.g. computers operated openly,
or similar.
• The max. data transfer rate decreases with increasing distance. However, you should not
position another Bluetooth device in the direct proximity of the bluetooth stick, maintain a
®
distance of at least 30 cm.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number
in the search box. You can then download the EU declaration of conformity in PDF
format.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Bluetooth class ............................ II
®
Bluetooth version ........................ 4.0 + EDR
®
Transfer rate ................................. 3 Mbit/s
Transmission frequency................ 2,4 – 2,483 GHz
Transmission power...................... max. 20 dBm 100 mW
Range ........................................... max. 10 m
System requirements .................... Windows
only 32 bit), Vista™ (32/64 bit), 7 (32/64 bit),
8 (32/64 bit), 8.1 (32/64 bit), 10 (32/64 bit)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
stick to a free USB2.0/
®
stick does not work in this mode.
®
device to another). In practical
®
XP (Home, Pro, with SP1, SP2, SP3,
®
*1491408_v1_0816_02_jh_m_en_(1)