Herunterladen Inhalt Inhalt Diese Seite drucken

Information On Safeties; General Precautions; Mechanical Safeties; Elettrical Safeties - CELME TOP 220 Aufstellung-Anwendung-Wartung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1.1 GENERAL PRECAUTIONS

• The slicer must be managed by skilled personnel, familiar with the instructions for use and safety
contained in this manual.
• In the case of rotation of the personnel, vocational training is necessary.
• Even if the machine comes with several safety systems, avoid setting the hands near the blade and
moving parts.
• Before the cleaning and maintenance operations, check to make sure the machine is disconnected from
the mains.
• Periodicaly check cable and electric elements conditions.
• Never use the slicer for cutting freezed food, meat and fish with bones, or for non-food products.
• Whenever the blade diameter is reduced of more than 6 mm., apply to the assistance service for
replacement.
• Never carry out repearing operations personnally, but apply always to skilled personnel.

1.2 MECHANICAL SAFETIES

The slicers we produce and which are described in this manual meet, as far as safeties are concerned, the
prescriptions on the risks of mechanical type issued by E.E.C. as : 2006/42/CEE. for the sanitary regulations
they comply with the rule 1935/2004/CEE.
All securities are obtained with:
• Fixed ring around the blade
• Releasing device for the removal of the saddle
• Different protections on the saddle

1.3 ELECTRICAL SAFETIES

The safeties against electrical risks comply with the rule 2006/95/CEE and regulations cenelec
EN 60335-2-64.
• All our slicers type TOP include a security switch for restarting the machine whenever a fortuitous lack of
current occurs .
• The motor includes a thermal overload protection.
• All top slicers have all electric parts protected by hand contact.
Due to the perfect insulation of all the electric elements and the remarkable resistance of all the materials
used, our machines can be installed to work inside moist premises.
ATTENTION: do not use water to clean the slicer, only a humid cloth.
WARNING: In conformity with point 1.7.2. "instructions on further risks" contained in the regulation
2006/42/CEE, these protections and safeties strictly comply with these regulations.
We point out however that the above mentioned protections, even if they sensibly reduce both the possibility
and extent of the damage, do not eliminate fully the risk of cutting.

1) INFORMATION ON SAFETIES

9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Top 250Top 275Top 275 xxlTop 300

Inhaltsverzeichnis