Camry Premium CR 1173 Bedienungsanweisung Seite 6

SETTING THE CLOCK
After plugging in the AC power, "00:00" will appear and start blinking on the LCD display.
1. In Power Off (Standby) mode, press and hold the CLOCK SET Button (B13) on remote control or main unit, the 24 HOUR format "24H"
will show in display.
2. Tap the Previous / Next Button (B4, B18) on remote control or main unit to select 24 Hour format if necessary. Otherwise, press the
CLOCK SET (B12) Button to confirm 12 Hour clock format and enter clock setup mode, Hour digits will be flashing.
3. Tap the Previous / Next Button (B4, B18) on remote control or main unit to adjust the hour. Press and hold the button for fast advance /
reverse setting.
Note: Make sure the hour is set so that the PM indicator is displayed correctly.
4. Press the CLOCK SET (B12) Button on remote control to confirm the hour setting, the minute digits will flash to prompt for input.
5. Tap the Previous / Next Button (B4, B18)on remote control or main unit to adjust the minute. Press and hold the button for fast advance
/ reverse setting.
6. Press the CLOCK SET (B12) Button on remote control again to complete the setting.
NOTE: The clock and radio station presets will need to be reset if the power is interrupted or in the event of a power outage. "00:00" will
appear and start blinking on the LCD display to notify you that the power was interrupted and the clock will need to be reset. Please
follow steps 1-6 above to reset the clock.
CHECKING THE CLOCK
The unit will show the current time in standby mode. To check the current time in Power ON mode, press and hold the CLOCK SET (B12)
Button on main unit or remote control for 3 seconds, the current time will show for 5 seconds and then return to the previous screen.
ALARM OPERATION (REMOTE CONTROL ONLY)
SETTING THE ALARM CLOCK
This function allows the system to turn on automatically and wake you using a beeping alarm, the CD, USB or BU the RADIO.
1. Press and hold the TIMER (B13) button on the remote control until the display shows "On ", and the hour digits flash.
2. Press the Previous / Next Button (B4, B18) buttons to adjust the hour digits, and then press the TIMER button to confirm. The minute
digits will flash on the display.
3. Press the Previous / Next Button (B4, B18)buttons to adjust the minute digits, and then press the TIMER (B13) button to confirm.
4. When the Previous / Next Button (B4, B18) On Timer Clock set is set, the display will show "OFF" and the hour digits will flash.
5. Press the Previous / Next Button (B4, B18) buttons to adjust the hour digits, and then press the TIMER (B13) button to confirm. The
minute digits will flash on the display.
6. Press the Previous / Next Button (B4, B18) buttons on the remote control to adjust the minute digits, and then press the TIMER button to
confirm.
7. Press the buttons to select CD, USB ,BT or FM mode, then press the TIMER (B13) button to confirm. The display will show "VOL#" and
flash.
Press the Previous / Next Button (B4, B18) buttons to adjust the volume, and then press the TIMER button to confirm.
8. Press the TIMER (B13) button to select "Timer On", and the Timer is now
set.
9. In standby mode, the Timer Icon will show on the display to indicate the Timer is On.
NOTE:
1.) If "Wake to CD, USB" is selected but a CD is not inserted, the alarm will default to the Beeping Alarm automatically when the alarm
wake time is reached.
2.) For 'Wake to Radio", the system will default to the last FM radio station listened to before switching off.
3.) The crescendo alarm will increase to the volume level you have set.
ACTIVE/DE-ACTIVE ALARM FUNCTION
1. To active ALARM, tap the TIMER (B13) Button once, and the alarm icon will show on LCD display.
2. Cancel the ALARM function by tapping on the TIMER (B13) Button again. The alarm icon will go off.
Wake to Radio, CD, USB or BUZZER Alarm
· When the alarm time is reached, the CD, USB or radio beeping alarm will sound for 60 minutes then shut off and reset itself for the
following day (without pressing the snooze button).
· To stop the alarm immediately after it sounds, tap the POWER / STANDBY Button (A1,B1) on remote control or on main unit once. It
resets itself for the following day.
· To cancel the following day alarm, tap the TIMER (B13) BUTTON once, ALARM icon goes off.
RADIO OPERATION
1. Tap the POWER / STANDBY Button (A1,B1) on main unit or remote control to turn on the unit.
2. Tap the SOURCE Button (A1, B11) on main unit or remote control to select FM mode, the FM radio frequency appear in display.
3. To manually tune to a specific radio station, tap the Track Down, Track up (A10, A11, B8, B18) on either main unit or remote control
repeatedly. Use the manual tuning method to tune in weaker stations that are bypassed during Automatic Tuning.
4. To automatically tune to the next available radio station, press and hold the Track Down Button (A10, A11, B8, B18) on main unit or
remote control for 1-2 seconds until frequency readout on the display begins to scan and then release the button. The tuner will stop
scanning when it receives the next broadcasting station of adequate signal strength.
5. Press the volume control on main unit or remote control to adjust the volume control to the desired volume level.
FM / FM Stereo reception
6