nedis MIXD050GY Kurzanleitung Seite 3

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
DO NOT OPEN! - RISK OF ELECTRIC SHOCK
Do not open the product to prevent the risk of electric shock. There are no serviceable parts inside.
Servicing by quali ed personnel only!
DO NOT EXPOSE TO MOISTURE OR RAIN!
CONNECTING THE MIXER:
- This DJ Mixer is equipped with a 12V AC adapter (02).
- Make sure the POWER SWITCH (01) is in OFF position before connecting equipment to mixer.
Connect to main ampli er with AMP unbalanced output jacks (03).
-
There are 2 LINE/PHONO inputs (04) , with the LINE/PHONO button (06) you can set the
-
input to LINE or PHONO.
- When connecting turntables, use GROUND (05) to avoid background noise.
- There is 1 CD (LINE) input (07).
- Microphone input for 6,35mm (08).
Headphone input is located on the front panel (09).
-
OPERATION:
Numbers correspond with numbers on drawing
01.
ON/OFF SWITCH
LED (10) will burn when power is ON.
11. LED MASTER OUTPUT LEVEL METER
For left and right channel
12.
STEREO/MONO SWITCH
For making the overall output signal mono
13. CHANNEL LEVEL CONTROL
For adjusting the input level for each individual channel
14.
CROSSFADER
Slide switch that allows mixing the signals of channel A and channel B (13).
15.
VOLUME CONTROL
Controls volume on headphone output (03).
16.
Microphone TALKOVER
When this button in ON position, the DJ MIC signal will reduce the volume of the
music. Music volume automatically increases again when there is no signal on the micro
phone.
17.
DJ MIC VOLUME CONTROL
For adjusting volume level of DJ MIC (05)
KN-DJMIXER10
!