Inhaltsverzeichnis
Werbung
Die Batterie aufladen
Symbole
1. Dauerrot = Ladegerät defekt
Rouge con�nu = Panne du chargeur
Siehe (6.) Anzeigefeld für Details
Voir le panneau d'affichage pour plus de détails
1. Gelb blinkend = Externer Fehlerzustand
Orange clignotant = condi�on d'erreur externe
Siehe (6.) Anzeigefeld für Details
Voir le panneau d'affichage pour plus
1. Grün blinkend = USB-Port aktiv
Vert clignotant = port USB actif
Leuchtet grün = Sicheres Entfernen USB
Vert fixe = sûr pour re�rer le lecteur flash USB
1. The Fault / error /USB indicator will display faults, errors and USB activity shown in the
table above. If a fault or error is indicated check the (6.) error display panel for the code and
find the description in the "charger error and fault codes" list below.
2. The Battery charging indicator has 4 states as shown in the table above.
3. The AC power indicator will illuminate solid blue when the charger is connected to AC power
4. The USB Host Port allows data to be transferred to and from the charger using a standard
USB flash drive, including the downloading of charge tracking data and updating of the
charger's software and / or charge profiles.
5. The Charging Output Indicator means that the charger output is active, and there is a
potential risk of electric shock.
6. The Charge profile / Error display panel shows one of four possible codes to indicate
different conditions:
'F' codes meaning that an internal fault condition has caused charging to stop.
�
'E' codes meaning that an external error condition has caused charging to stop.
�
'P' code meaning that the charger programming mode is active.
�
'USB' code meaning that the USB interface is active, the USB drive should not be removed.
�
The 'E,' 'F' and 'P' codes will appear, then are followed by three numbers and a period
�
to indicate different conditions (e.g. E-0-0-4). See the "Charger Fault Codes" or
"Charger Error Codes" in the troubleshooting section of the owners manual
for details on these conditions and their solutions.
7. The Select charge profile button is used to select a charge profile from those stored on the
charger. Up to 25 charge profiles can be stored. See the "Selecting A Charge Profile" in the
charger section in the owners manual for instructions.
Delta Q IC1200 Ladegerät Übersich
1. Fehler / Usb Indikator
Erreur / Erreur / Indicateur
2. Batterieladeanzeige
Indicateur de charge de la ba�erie
3. AC Leistung Indikator
AC Power indicator
AC Power indicator
4. USB Hostanschluss
Indicateur d'alimenta�on CA
Port hôte USB
IC1200 Symbole
de
5. Lade-Ausgangsanzeige
6. Ladeprofil / Fehleranzeige
Indicateur de sor�e de charge
Profil de charge / Affichage d'erreur
Bouton Sélec�onner le profil de factura�on
3. Konstantes Blau = Wechselstrom
Bleu uni = alimenta�on CA disponible
2. Grün blinkend = Niedriger Ladezustand
Vert clignotant = Faible état de charge
2. Grünes Dauerlicht = Hoher Ladezustand
Vert clignotant = état de charge élevé
détails
2. Grün blinkend = Hoher Ladezustand
Vert clignotant = état de charge élevé
2. Durchgehend grün = abgeschlossen
Vert fixe = Charge terminée
7. Wählen Sie die Ladeprofil-
Schaltfläche
11
Werbung
Inhaltsverzeichnis
