BeeWi BBT 200 Dual Air Streamer Bedienungsanleitung Seite 6

6
- Repeat the step above to complete another pairing with a second receiver.
- When the Streamer is connected to the Bluetooth receiver, the blue indicator
will pulse slowly and it will automatically send the "play" instructions to iPod
to stream the music
3. Connect to already paired Bluetooth receiver(s)
3.1. The Streamer will automatically connect to last paired Bluetooth devices after
power on. If no paired device is found, it will activate a pairing mode (blue indicator
blinking rapidly)
3.2. The Streamer will automatically search for the last played devices to establish
the second connection. If no stored device be found within 1 min, it will enter the
standby mode automatically.
3.3. Short click the button to connect to the paired device when in standby mode
(blue indicator blinking once every 5 seconds) or long press the button for 5 seconds
to activate the pairing mode (blue indicator blinking rapidly).
Note: the Streamer can store up to 2 Bluetooth receivers in pairing list. Once a third
connection is established the very first stored receiver will be replaced.
Note: When one device has been disconnected abnormally during Dual Air stream
circumstance, the remaining active receiver could possibly be playing on and off for
awhile until a normal disconnection is detected.
3.4 Function Matrix
Function
Power on
Pairing / Search
Downloaded from www.Manualslib.com
wirelessly.
State
Power off
Power on / stand by
manuals search engine
Operation
Short click 1 second
Long press 5 seconds
Indications
(B) Blink rapidly
(B) Blink rapidly