Switch On; Switch Off - Zipper Maschinen ZI-KS210 Betriebsanleitung

Cutting head cutting angle:
Raise the cutting head to upper position
Loosen the fixing knob tilt (1).
Set the desired angle.
Tighten the fixing knob tilt.
Fence:
Extend the fence by sliding it out to match
the degree of the bevel cut.
Unlock the fence cam locking knob and
position the fence.
Lock the fence cam locking knob.

14.2.1 Switch on

 Connect the machine to the power supply
 Read, understand and apply the security instructions.
 Push ON-OFF-switch.
 Wait until the saw blade has reached its full speed.
 With the thumb you now push the safety lock lever blade guard to the left to unlock the lower blade
guard

14.2.2 Switch off

As soon as you release the ON-OFF-switch, the motor and the saw blade stops
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-KS210
OPERATION
29