Device Explanation - nedis NWTG100YE Anleitung

Tone generator and probe

Device explanation:

1. Tip
2. Amplifier probe
3. Test button
4. Speaker
Instructions:
• Overall instructions:
1. Connecting the tone generator.
In terminated working cables:
Connect one test lead to a terminated wire and the other test lead to an earth or equipment
ground.
In unterminated or non-working cables:
Connect one test lead to an unterminated wire and the other test lead to another unterminated
wire.
2. Depress the round on/off button of the amplifier probe. The volume control switch can be
adjusted to suit the environment. Volume can be increased to overcome noise, or decreased to
reduce interference.
ENGLISH
5. Tone generator
6. DUAL COLOUR LED
7. Red and black test leads
8. 4 conductor modular cord and plug
A. 3 position toggle switch
B. Phone jack
C. Volume control
2