Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
CPS-1000 VEHICLE USB CHARGER
ITEM NO.: 1275905
INTENDED USE
This product is designed to charge and power USB devices in a vehicle. The product is equipped with a
micro USB connector. For example, this enables you to charge or power smartphones, MP3/MP4 players,
portable games consoles or digital cameras. The product must only be operated on cigarette lighter
sockets with a 12 or 24 V/DC power supply. The product is protected against overload, overcharging and
short circuits.
The product may only be used in the interior of the vehicle, i.e. outdoor use is not permitted. Contact with
moisture must be avoided at all costs.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In addition,
improper use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions
carefully and keep them. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
DELIVERY CONTENT
• Vehicle USB Charger
• Operating instructions
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• Always turn off the connected device before connecting and disconnecting.
• Disconnect the product when you are not using it.
• The product generates heat during use. Ensure that there is sufficient ventilation and do not
cover the product during use.
• Make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. Allow the product to reach room
temperature before connecting it to the power supply and putting it to use. This may take
several hours.
• Never leave the product and the connected device unattended during use.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not covered by
these operating instructions, please do not hesitate to contact our technical support or another qualified
specialist.
OPERATING ELEMENTS
2
VERSION 01/15
1
OPERATION
Always turn off the device that you want to connect before connecting it to
the micro USB connector.
Ensure that the product is connected properly. If it is not connected
properly, it may become hot or cause an electrical shock or fire.
Ensure that the connection specifications for your mobile device comply
with the connection data for the product (see technical data).
Always read the operating instructions for your mobile device.
• Connect a USB device to the micro USB connector (3).
• Connect the vehicle USB charger to a cigarette lighter socket in your vehicle with a 12 or 24 V/DC power
supply.
• The USB device will now charge. If you wish to use the USB device, you may now turn it on.
• Disconnect the USB device from the vehicle USB charger when charging is complete or when you have
finished using it.
• Unplug the vehicle USB charger from the cigarette lighter socket after use.
You can use the vehicle USB charger when the engine is on or off. However, you should not start
the engine if the vehicle USB charging device is connected, as the cigarette lighter socket will be
disconnected (this does not necessarily apply to all vehicle models). If the vehicle power supply
is used for an extended period of time, it is recommended to start the engine in order to charge
the battery. Current consumption over an extended period with the engine switched off causes the
vehicle battery to discharge.
MAINTENANCE AND CLEANING
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these could damage the housing or even impair the functioning of the product.
• Disconnect the product from the vehicle power supply before cleaning.
• Disconnect any connected mobile devices from the product before cleaning.
• Do not immerse the product in water.
• Under no circumstances should you service any of the components in the interior of the product,
therefore never open/dismantle it.
• A dry, soft and clean cloth is sufficient for cleaning. Do not press too hard on the housing as this can lead
to scratch marks.
• Dust can be easily removed using a soft and clean long-haired brush.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
TECHNICAL DATA
Input voltage ..................................................12 – 24 V/DC
Output voltage / current .................................5 V/DC, max. 1 A
Standby power consumption .........................max. 0.1 W
Cable length ..................................................1 m
Fuse ...............................................................5 A / 32 V (not replaceable, SMD)
Operating conditions ......................................0 to +40 °C, 25 - 85 % RH
Storage conditions .........................................-10 to +55 °C, 20 - 90 % RH
Dimensions (W x H x D) ................................24 x 24 x 64 mm
Weight ...........................................................32 g
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the
time of printing.
© Copyright 2015 by Conrad Electronic SE
1 Clip/s
2 Plug
3 Micro USB connector
3
V1_0115_02-DS
Werbung
