Herunterladen Diese Seite drucken

Icidu NI-707531 Handbuch Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
E N G L I S H
PA C K A G E C O N T E N T S
Before proceeding with the installation, check that all the parts required are present. The
packaging should contain the following:
- 8 Ports Switch
- Power adapter: 9V DC/0.6A
- Manual
T E C H N I C A L S P E C I F I C AT I O N S
- Number of ports 8 x 10/100 Mbps RJ45 port
- Supports: IEEE 802.3 10BASE-T, IEEE 802.3U 100BASE-TX
- Supports: Full and half duplex (Auto-Negotiation)
- Transfer mode: Store-and-forward
- Each port can be used as an uplink
- MAC Address Learning: Automatically learning and Update
- Network protocol: CSMA/CD
- Working temperature: 0 - 40 °C
- Humidity: 10 - 90%
- Independent operating system
12
Downloaded from
www.Manualslib.com
manuals search engine
A P P L I C AT I O N O P T I O N S
A network switch is a distribution centre for all your network connections. It allows you to
connect several PCs within a network to each other, and to share files, peripheral devices
and Internet connections. This switch allows you to provide several computers with easy ac-
cess to your ADSL connection, as well as shared access to the Internet, for example.
Connect the ADSL modem to Port 1 of the switch and LED 1 will light up within a few
seconds. You may now connect the PCs; the related LEDs will light up after the PCs start-up.
If the ADSL modem has a DHCP* function, the PCs in the network will also be able to access
the Internet. It will now be very easy to share folders and/or printers.
* The DHCP server in your router will automatically assign IP addresses to PCs in the home
network. The DHCP server in your router will fi rst check for unassigned IP addresses and
will assign the next available IP address to the PC in question.
H A R D W A R E I N S TA L L AT I O N
As soon as the power adapter of the switch is connected, the power LED (Green) will light
up and the Link/Act LEDs will light-up once. The other LEDs will light-up as soon as one of
the UTP ports is connected to the computer. The LEDs will flash when data is transmitted
from one computer to another.
13

Werbung

loading