Icidu NI-707505 Handbuch Seite 7

E N G L I S H
I N T R O D U C T I O N
First of all thank you for buying the ICIDU Switch. If you wish to connect
several PCs to each other, you will require a separate device that
connects the PCs to each other. Generally, two devices are available for
this purpose. the hub, and the switch. A switch is able to distinguish
between the various segments of a network. It also optimises data fl ows
to minimise the overall load on the network. This switch enables you to
set up a network quickly and easily.
P A C K A G E C O N T E N T S
Before proceeding with the installation, check that all the parts required
are present. The packaging should contain the following:
- 5-Port Switch
- Power adapter ( 5-port Switch) 9V DC/0.6A
- Manual
T E C H N I C A L S P E C I F I C A T I O N S
- Number of ports 5 x 10/100 Mbps RJ45 port
- Supports: IEEE 802.3 10BASE-T, IEEE 802.3U 100BASE-TX
- Supports: Full and half duplex (Auto-Negotiation)
- Transfer mode: Store-and-forward
- Each port can be used as an uplink.
- MAC Address Learning: Automatically learning and Update
- Network protocol: CSMA/CD
- Working temperature: 0 - 40 °C
- Humidity: 10 - 90%
- Independent operating system
8
Downloaded from www.Manualslib.com manuals search engine