Connecting The Drive To Your Computer - Toshiba STOR.E CANVIO 3.5 Benutzerhandbuch

Connecting the drive to your
computer
NOTE
User's Manual
Downloaded from www.Manualslib.com
1
2
3 4
1. Air Vent
2. USB 3.0 port
3. DC IN 12V Jack
4. DC output plug
1. Turn off your computer.
2. Plug the AC adaptor's DC output plug into the DC IN 12V jack of the
drive and the power cord into a live wall outlet.
3. Plug the USB 3.0 Standard-A connector into a USB port of your host
system or an active USB HUB.
You may need USB 3.0 Express Card Host Controller for your computer if
the computer doesn't have USB 3.0 port. You also can connect the device
to USB 2.0 port of your computer, However the transfer rate will be
downgraded to that of USB 2.0.
4. Now, plug the USB 3.0 Type B connector into the corresponding port of
the drive itself.
5. Boot up your computer.
the Power/Data indicator light will illuminate
■
the drive will power up
■
the drive should mount and a new drive icon should appear in
■
"My Computer"
manuals search engine
5
6
5. USB 3.0 Type B micro connector
6. USB 3.0 standard Type A connector
7. USB 3.0 host port, backward compatible
with USB 2.0
STOR.E CANVIO 3.5" Desktop
7
EN-6