Maintenance - Fermob Hoop L1200 Kurzanleitung

Un emballage réutilisable pour faciliter le
EMBALLAGE
rangement & transport du luminaire HOOP L1200.
1 zone pour ranger
le transformateur.
1 support pour
faciliter le rangement.
1 zone pour empiler
8 anneaux lumineux.
1 zone pour enrouler
le câble d'alimentation.
5
English
FOREWORD
Remove the product carefully from its packaging. Check that the product is not damaged
and that it works correctly.
Do not attempt to make any repairs or carry out any modifications yourself, as this would invalidate
the guarantee.
If the product is damaged, or if you have any questions about using the product,
please contact your retailer.
OPERATING INSTRUCTIONS
HOOP L1200 is controlled using the ON/OFF button on the power cable
short clicks :
1 to u c h 1 to u c h
ère : ON
c o u rt lo n g
2 to u c h 2 to u c h
: OFF
c o u rt
lo n g
Bluetooth RESET function: to pair with a new smartphone,
or if there is a connection problem, press and hold for 10 seconds
until the lamp flashes to confirm that it has been reset.
Controlled remotely with the integrated Bluetooth system,
and compatible with the «Fermob Lighting» app
CHARGING
Outdoor power supply system (if wall socket available).
The wall socket must be earthed.
6

MAINTENANCE

Use a soft cloth and lukewarm water. Never use chemical cleaning agents!
For very ingrained dirt use a neutral pH soap.
PRECAUTIONS
Follow these tips to get the best out of your Hoop L1200 product.
Keep out of the reach of children
Check the condition of the power supply cable regularly
If the cable is damaged, stop using the product.
Always unwind the cable fully.
Connect the product to a system fitted with a residual-current
long click :
device that trips at a current not exceeding 30 mA.
intensity change
ère
100 % à 10 %
TECHNICAL INFORMATION
10 % à 100%
OUTDOOR
PROTECTION:
Transformer
IP 67
Diffuser
IP 54
REGULATORY COMPLIANCE
The light source and the battery contained in this light are not replaceable;
At the end of life, the entire luminaire must be replaced
In accordance with WEEE Directive 2002/96/EC, you must return this product
to a collection point for recycling at the end of its service life If you require
any further information, please contact Fermob.
Fermob declares that this product conforms to the following European directives: R&TTE (1999/5/EC),
LVD (2006/95/EC), RoHS (2011/65/EU), EMC (2004/108/EC) and Battery (2006/66/EC).
The corresponding Declaration of Conformity may be obtained by contacting Fermob: www.fermob.com
BLUETOOTH MESH
UV RESISTANT
Power consumption : 7 W
Power supply : 230V
Product guarantee: 2 years
Recommended operating temperature : 0 / 40 °C
7