Inhaltsverzeichnis
Werbung
Procedure for switching sources:
You can connect a second source to the converter box. If both sources are connected and powered on,
you can switch between HDMI input channels by pressing the source button on the front panel or on the
remote.
Front panel LED status indicator:
Action/ LED sequence
HEALTH & SAFETY PRECAUTIONS
WARNING – EYESTRAIN, BLURRY VISION AND MOTION SICKNESS
Use of the 2D to 3D video converter can result in eyestrain after a sustained period of time.
Watching 3D video images or playing stereoscopic 3D video games can also result in motion
sickness. Follow these instructions to help avoid eyestrain, blurry vision, dizziness, or nausea:
• Avoid excessive use of the product. We recommend that parents monitor their children for
appropriate usage.
• Take a 10 to 15 minute break every hour, even if you think you don't need it. Every person is
different, so take more frequent and longer breaks if you feel uncomfortable.
State
OFF
Initialize
Ready, No TV
HDMI – 1, Bypass
HDMI – 1, 2D > 3D
HDMI – 1, 3D (SBS) > 3D
HDMI – 1, 3D (TAB) > 3D
HDMI – 1, 3D (FP) > 3D
HDMI – 1, 3D > 2D
HDMI – 1, BYPASS
HDMI – 2, 2D > 3D
HDMI – 2, 2D > 3D
HDMI – 2, 3D (SBS) > 3D
HDMI – 2, 3D (TAB) > 3D
HDMI – 2, 3D (FP) > 3D
Tx display invalid
USB update in progress
Actualization USB completed
USB update cancelled
USB update cancelled
USB update failed
3
Notes
Connect power cable
Should last no longer then 2 seconds
Also default state if TV and no Rx
device
Also default state if TV and no Rx
device
Invalid display type connected
(flashing LEDs)
Bad USB key
Bad file
USB upgrade procedure must be
repeated (flashing LEDs)
Werbung
Inhaltsverzeichnis
