Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started; Connecting The Microphone; Aux Input - Fenton KSM 130.162 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

GETTING STARTED

Plug the supplied AC adapter into the DC jack (12V DC input) on the rear panel of the unit and connect it to a standard AC wall
outlet.
Press the POWER ON/OFF button on the Karaoke system to turn on.
Note: When the unit is not operated for long periods of time, unplug the AC adapter from the unit and wall outlet.
CONNECTING LIGHTED STAGE MAT
WARNING: Please ensure the floor that you are going to use the lighted stage mat on is completely dry to avoid slipping.
To prevent the lighted stage mat from getting damaged:
To keep away from water.
Do not step on the LED strip surrounding 4 sides of mat.
Do not fold the LED strip.
Take off shoes before you step on the mat.
1.
Plug the lighted stage mat into the MAT CONTROL OUT connector at rear panel of the base.
2.
LED surrounding 4 sides of the mat will be lighting and changing with the music.
Note: If the brightness is glaring, turn on room lights.

CONNECTING THE MICROPHONE

Caution: Tapping or dropping the microphone while it is on can permanently damage your microphone. Do not swing the
microphone around by the cord.
Note: To prevent feedback or whistling from occurring, please be sure that the microphone is not too close to unit's speaker.
Turn the ON/OFF switch located on the Microphone to the OFF position when you put the microphone into Mic Holder.
1.
Connect the supplied Microphone to either one of the MIC input jacks.
2.
Press the POWER ON/OFF button to turn on the unit.
3.
Slide the ON/OFF switch located on the Microphone to the ON position and speak or sing into the Microphone. The
Microphone sensitivity and loudness can be adjusted as required by turning the MIC VOLUME control and/or MASTER
VOLUME control.
4.
Turn off the unit after use by pressing the POWER ON/OFF button again. Place the microphone (s) in the Mic Holder
(s) of the stand.

AUX INPUT

This feature allows you to plug a tablet or smartphone (both not included)which contains music and lyrics for Karaoke singing.
1.
Placed your external device in the Tablet/Smartphone holder on microphone Stand.
2.
Plug a 3.5mm audio cable (included) into the headphone jack of your tablet or smartphone and connect the other end
(3.5mm plug) into the AUX IN jack on the rear side of this unit.
Caution: Please take extra care when plugging your external device into the AUX IN jack. Do not accidentally plug into the
MAT CONTROL OUT connector. Doing so may cause damage to your device.
3.
Press the POWER button to turn on the unit, your external device as well.
4.
Tap the FUNCTION button to select AUX mode,
5.
Select a Karaoke song stored in your tablet or smartphone to play. Slide the ON/OFF switch located on the Microphone
to the ON position and speak or sing into the Microphone. The Microphone sensitivity and loudness can be adjusted as
required by turning the MIC VOLUME control and/or MASTER VOLUME control.
6.
Adjust the volume control of your audio player and then the MASTER VOLUME CONTROL of the unit to obtain the
desired audio sound level. Start your performance!! Adjust the ECHO control if necessary.
7.
Turn off both the external audio player and this unit after use, unplug the audio cable from AUX IN jack.
5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ksm 130.163

Inhaltsverzeichnis