Operation - baumarkt Stockholm Aufbau- Und Bedienungsanleitung

Operation

General information
Unpack the electrical fireplace carefully and keep the packaging for future use, for example in case
you need to pack up the device if you are moving, or to return it to your specialist retailer.
The heating setting of 1kW or 2kW can be selected via a switch on the front of the device.
Do not connect the heating device to the power supply, before it has been properly installed. Note:
If the device is used in an environment with only minor background noise, you may be able to hear
the sound of the motor used to operate the flame effect. This is normal and you do not need to be
concerned.
Warning: The device is not equipped with a device for controlling the room temperature. The he-
ating device must not be used in small rooms that are occupied by individuals who are unable to
independently leave the room, unless constant supervision is ensured.
Electrical connection
WARNING: THIS DEVICE MUST BE GROUNDED
Operation
The device can be operated via the switch on the right-hand side of the front of the electrical fi-
replace, or using the included remote control.
Date
Cursor
Heating Power
Reset Position
Timer
- 33 -
Temperature / Timer Selection
Timer Off Time
Timer On Time
Time / Temperature
Automatic Heater Control
Brightness of Flames