nedis Zigbee ZBHTR10WT Kurzanleitung Seite 7

• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.
• Do not drop the product and avoid bumping.
• Keep distance from flammable objects.
• Do not expose the product to water or moisture.
• Children should be supervised to ensure that they do not play with the
product.
• Always purchase the battery recommended by the product manufacturer for
the product.
• Do not use any battery which is not designed for use with the equipment.
• Use only the cell or battery in the application for which it was intended.
• Do not mix cells of different manufacture, capacity, size or type within a
product.
• Observe the plus (+) and minus (–) marks on the cell, battery and equipment
and ensure correct use.
• Some wireless products may interfere with implantable medical devices and
other medical equipment, such as pacemakers, cochlear implants and hearing
aids. Consult the manufacturer of your medical equipment for more
information.
• Do not use the product at locations where the use of wireless devices is
prohibited due to potential interference with other electronic devices, which
may cause safety hazards.
Placing the batteries (image C)
-
Use only size AA batteries for this product.
-
Do not use rechargeable batteries.
1. Rotate the body A
2. Place 2 size AA batteries (not included) into the battery compartment.
-
Make sure to match the (+) and (-) polarity markings.
The current temperature A
display A .
4
3. Align the marking on A
4. Rotate A
2 clockwise.
counterclockwise, and pull the body open.
2
and installation mode A
7
to the 'TOP' marking on the ring nut A
2
e
7
lights up on the LCD
1 .