Herunterladen Inhalt Inhalt Diese Seite drucken

Quick Start Guide; Safety Instructions - nedis COOL115 Serie Kurzanleitung

Vorschau ausblenden Andere Handbücher für COOL115 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
a

Quick start guide

Air Cooler
For more information see the extended manual online:
ned.is/cool115cwt ned.is/cool115bk
Intended use
The Nedis COOL115xx is an air cooler with a 3 L water tank capacity.
The product is exclusively intended as an air cooler.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Specifications
Product
Article number
Dimensions (l x w x h)
Weight
Power input
Rated power
Water tank capacity
Air volume
Automatic air swing
Timer
Remote control
Main parts (image A)
Cover
1
2
Ice pack
Water tank
3
Air filter
4
5
Curtain paper
Air filter slot
6
Air cooler
7
8
Water tank lock
9
Water tank slot
Water hose
10
11
Power cable
12
Vertical air flow
control
Air outlet
13

Safety instructions

-
WARNING
• Ensure you have fully read and understood the instructions in this
document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a
damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Disconnect the product from the power outlet and other
equipment if problems occur.
• Close supervision is necessary when the product is used by or near
children, animals or infirm persons. Do not allow children to play
with it or touch it.
• Do not use the product in rooms where flammable liquids or gases
are used or stored.
COOL115xx
Air Cooler
COOL115xx
280 x 250 x 560 mm
4.2 kg
220 – 240 VAC 50 – 60 Hz
80 W
3 L
270 m
/h
3
Yes
0.5 h – 7.5 h shut-off
Yes
Remote
14
15
Air flow on / off
Wind
16
Fan speed
17
18
Swing on / off
Cooler on / off
19
Timer
20
21
Cooler on / off
22
Swing on / off
Timer
23
24
Display
25
Wind
Fan speed
26
Air flow on / off
27
• Do not use the product in wet or damp environments.
• Avoid direct sunlight.
• Do not cover the product.
• Do not use the product without water in the tank.
• Do not use solvents to clean the product.
• Only plug the cable into a wall outlet. Do not use extension cords.
• Only use a power outlet rated 10 A or higher.
• Do not insert any objects into the product.
Setup
1. Place the product on a stable and flat surface.
2. Plug the power cable A
Filling the water tank
1. Pull out the water tank A
2. Lift the cover A
1
.
3. Fill A
3
with water.
-
Do not fill the water tank above the "max" indicator.
-
Do not use the product if the water level is below the "min"
indicator.
4. Place A
back on A
1
3
5. Insert A
3
back into the water tank slot A
Using ice packs
The use of ice packs A
4
Use A
2
if water does not provide enough cooling.
4
1. Place A
2
in the freezer until frozen.
2. Turn the water tank lock A
3. Pull out A
3
.
4. Lift A
1
.
5. Place A
in A
.
2
3
6. Make sure the water level is between "min" and "max".
7. Place A
back on A
1
3
8. Place the water hose A
9. Insert A
3
back into A
10. Turn A
to lock A
8
3
Using the fan
1. Press A
27
to switch on the fan.
2. Press A
26
to set the fan speed.
A
indicates the current fan speed.
24
3. Press A
27
to switch off the fan.
Using the cooling function
• Press A
21
to activate or deactivate the cooling function.
Setting air flow direction
1. Press A
22
to automatically swing the air flow from left to right.
2. Use A
12
to set the vertical air flow direction.
Setting the wind type
• Press A
25
to set the wind type.
A
24
indicates the current wind type
Using the timer
• Press A
23
to set the time to stand-by.
You can set the time to standby in 0.5 hr intervals from 0.5 – 7.5 hr.
A
24
indicates the time left to stand-by.
Using the remote
1. Press A
15
to switch the air flow on or off.
2. Press A
16
to set the wind type.
3. Press A
to set the fan speed.
17
4. Press A
18
to automatically swing the wind direction from left
to right.
5. Press A
19
to switch the cooling on or off.
6. Press A
20
to set the time to stand-by.
4
11
into the power outlet.
.
3
.
9
.
2
is optional.
to unlock A
.
8
3
.
into A
.
10
3
9
.
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis