Onix XCD-50SE Bedienungsanleitung Seite 28

FOR USE IN THE UNITED KINGDOM
The wires in this mains lead are coloured in accordance with the following code :
If the plug provided is unsuitable for your socket outlets, the plug must be cut o and a suitable plug tted.
The cut-o plug should be disposed of and must not be inserted into any 13 amp socket as this can result in electric shock.
The plug or adapter or the distribution panel should be provided with a 5 amp fuse. As the colours of the wires in the mains lead
of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows : The
wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which
is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Do not connect either wire
to the earth terminal of a three-pin plug.
NOTE
After replacing or changing a fuse, the fuse cover in the plug must be replaced with a fuse cover which corresponds to the colour
of the insert in the base of the plug or the word that is embossed on the base of the plug, and the appliance must not be used
without a fuse cover. If lost, replacement fuse covers can be obtained from your dealer.
Only 5 A fuses approved by B.S.I. or A.S.T.A to B.S. - 1362 should be used.
Downloaded from www.Manualslib.com manuals search engine
Blue : Neutral
Brown : Live