Werbung
Verfügbare Sprachen
Verfügbare Sprachen
➧
If using the monitor under Windows
we strongly recommend installing the Belinea settings file.
You can get this file from your Belinea dealer or download
it from the MAXDATA FTP server at ftp.maxdata.com.
Here, click the “Belinea_Treiber_Driver” directory and
download the Belinea.inf and README_Berlinea.TXT
files. Follow the installation instructions in the
README_Belinea.TXT file.
If you have connected the monitor to 2 computers
simultaneously via the DSUB and DVI connectors, you
can switch between the two displays using the
OSD buttons (
➧ ➧ ➧ ➧ ➧
You can adjust the image settings (such as brightness,
contrast, image position, phase etc) manually or by using
the LCD monitor’s automatic image adjustment feature.
This will adjust the image parameters to their optimal
settings for the current graphics mode. Press
in fig. 4) to start the automatic adjustment. The process
will take a short while to complete.
➧
You can adjust the brightness directly by pressing the
buttons (
is not displayed. Press the
brightness or
The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
Press the
OSD menu on the screen.
- Belinea 10 18 30
Downloaded from
www.Manualslib.com
9x/ME/2000 or XP
®
†
‡
and
in fig. 5).
ƒ
„
and
in fig. 4) while the OSD menu
button to increase
to reduce it.
…
button (
in fig. 5) to display the
Figure 5. Monitor features
manuals search engine
➧ ➧ ➧ ➧ ➧
Under Windows
NT 4.0 no separate setup file is required.
®
Select the vertical frequency and the number of colors
directly from within the “Settings” à “Control Panel” à
“Display” à “Settings” menu.
➧
If you have connected the monitor loudspeaker to your
PC, use the on/off switch on the base of the monitor (
and
in fig. 4) to switch the audio system on or off.
➧
If your monitor is connected to your PC’s sound card,
you can mute the sound by pressing the
ƒ
(
in fig. 4). Press the button again to turn the sound
back on.
➧
ˆ
(
You can switch the bass boost function (amplify bass
playback) on and off by pressing the
fig. 4).
Figure 4. Audio system controls
There are a total of 9 OSD submenus divided by
categories. Select the desired submenu by pressing
the OSD button
Functions”).
Press the
function or associated submenu.
If you selected a submenu, now select the subfunction
you want using the
Set the desired value using the OSD button
Press the
Repeat steps 2-5 to make further adjustments as
needed.
The OSD menu automatically disappears if no changes
are made for more than 60 seconds. The current
settings will be saved. You can close it manually by
pressing the
button
button (
or
(see section ”OSD Menu
OSD button to activate the selected
or
OSD buttons.
or .
button again to save the setting.
button.
‚
in
Werbung
