Important Note - WiMe kurve Bedienungsanleitung

WiMe Kurve Wireless Stereo Receiver User Guide
2.1 Power
•
Connect the included 9V AC power adapter to the Kurve's back panel connector
marked .
•
The blue light ring on the top of the Kurve should be on if the power connections are
correct and working properly.
2.2 Audio
•
Refer to the user manual of your hi-fi system or amplifier for instructions on how to
connect a line input.
•
Connect the Kurve into your hi-fi system or audio amplifier using the included RCA
cable.
•
If your hi-fi system or audio amplifier only has a single 3.5mm input connector, you can
connect it to the Kurve using the output on the back panel of the Kurve marked
•
The Kurve can also be used with stereo headphones. Connect your headphones to
the output on the back panel of the Kurve marked
The stereo headphones used MUST come with volume-control feature and
SHOULD be adjusted to the lowest volume before connecting it to the Kurve.
Page 6 of 32

IMPORTANT NOTE

.
Copyright © 2007 WiMe Pte Ltd
.