Pancook PCSP001 Handbuch

Pancook electrical salt and pepper mill set – English manual
Thanks for choosing our products.
It is a very easy to use and easy to clean mill set. Please clean the mill to keep a long life span.
Please follow the instruction:
To start:
1. Twist off the upper cover of the mill in anti-clock wise direction.
Remove the battery holder from the lower part of the mill.
2. Insert 4 x AAA batteries according to the indication of + and –
into the battery holder.
3. Fill the mills with salt and pepper by using the opening of on
the base part.
4. Put the battery holder back and twist the upper part to close
in clock wise direction. The mill is ready to use now.
5. Push the button to start
For rough grinding: turn the grinding wheel on the under part of
the mill in a anti-close wise direction. For fine grinding, just the
other way round.
Useful tips to keep in mind:
Products are made of stainless steel, but still corrosion can be
caused if no cleaning takes place after using the salt mill. We
strongly suggest to clean the surface after every use. Better to clean it with a soft cloth.
1.Do not leave the empty batteries in the mills.
2.Change 4 batteries at the same time, don't mix new and old.
3.Clean the surface after every use.
4.Don't put it in a dish washer.
5.Avoid humid circumstances
In case of any technical problems, please check if you have done the following:
1.If the batteries are correctly installed, or if the batteries are in shape
2.Check if pepper and salt are in the position to be grinded. If not, shake it softly until the position is ok.
3.If the grinding speed is lower than normal, time to change batteries
For questions/support, please contact helpdesk@outspot.eu
Imported by Confinity NV
Dorp 16
9830 Sint-Martens-Latem
Belgium
Pancook salt and pepper mill – Model number PCSP001