Albrecht DR400 Bedienungsanleitung Seite 45

Downloaded from www.Manualslib.com
alarm times are displayed on the screen.
• If you have configured a network connection, and use the DR400
again with the network in reach, the DR400 will automatically
re-establish the connection. In case you desire to change the network,
enter configuration to setup the corresponding connection.
• In the letters or numbers input screen, rotate the reel to choose letter.
Once you are on the letter you want, press
entry. When you are at the end of the input, press Select to confirm.
In case you want to correct something press
entry.
• The 3.5mm LINE OUT connector is for the connection to any speaker
system with a 3.5mm audio cable.
manuals search engine
to move to the next
to move to a previous