Inhaltsverzeichnis
Werbung
Chapter 2
This Chapter describes the front panel, rear panel and LED indicators of the
Switch.
2.1 Front Panel
The front panel of TL-SF1016 consists of switch model, switch LED indicators,
and 16 10/100Mbps RJ-45 ports.
The LED indicators include Power, Link/Act LED indicators, which are used for
monitoring and pre-troubleshooting of the Switch. The following section shows
the LED indicators of the Switch along with an explanation of each indicator.
Because of the difference among the mode of switch, some switches don't
include the 100Mbps indicator, such as TL-SF1048, TL-SF1016DS, TL-
SF1024D and a few of TL-SF1016 switch.
2.2 Rear Panel
The rear panel of TL-SF1016 features a power socket and a Grounding
Terminal (marked with
Downloaded from
www.Manualslib.com
Identifying External Components
Figure 2-1 TL-SF1016 Switch Front Panel sketch
Power LED: This indicator will light solid red when the Switch powers up.
If the LED is not lit, please check the power supply and connection.
Link/Act LED: The LED indicates Link/Active status. The corresponding
LED indicator will light solid green when connected to a network device.
It flashes green when data is being transmitted or received on the
working connection.
100Mbps: The corresponding port LED indicator will light solid green
when it's working on 100Mbps speed. Not lit indicates working on
10Mbps speed.
Note:
).
Figure 2-2 TL-SF1016 Switch Rear Panel sketch
manuals search engine
6
Werbung
Inhaltsverzeichnis
