Wiselion WBS-T007 Benutzerhandbuch Seite 8

Memories Check
Press the START/MEASURE button, and then press the function button "+" and "-" on the
side of the product to switch to view the measured values.
1. The thermometer can store up to 32 sets of recent measured values.
2. The memory serial number gradually increases with the number of measurements. After
reaching the 32 sets, it returns to the 1 set and is stored cyclically.
3. When in the query status, the LCD screen will display the "
Setting Modification
This product can modify the default setting parameters to adapt to people with different skin
colors or human bodies with different characteristics, as well as people at different
environment temperatures. The default settings have been made before leaving the factory.
If it is not necessary, it is recommended not to modify the factory defaults. If there is a need
to modify, please modify it as follows.
1. Temperature unit setting -F1 (Default is Celsius)
In the power-on status, press and hold the "SET" button to enter F1, and press the
function button "+" or "-" to switch between Celsius and Fahrenheit.
2. High fever warning setting-F2 (Default is 38.1℃/100.58℉)
In the F1 status, press the "SET" button to enter F2, press the function button "+" to add
0.1℃/32.18℉, press the function button "-" to decrease 0.1℃/32.18℉, and long press
to quickly increase or decrease the temperature value of the high fever warning.
3. Temperature offset setting-F3 (Default is 0.0℃/32℉)
In the F2 status, press the "SET" button to enter F3, press the function button "+" to add
0.1℃/32.18℉, press the function button "-" to decrease 0.1℃/32.18℉, and long press
to quickly increase or decrease. The adjustment range of F3 parameters is: -5℃~ 5℃
/23℉~ 41℉.
4. Sound switch setting -F4 (Default is On)
In the F3 status, press the "SET" button to enter F4, and press the function button "+"
or "-" to turn ON or OFF.
5. Exit the setting mode
In the F4 status, press the "SET" button to exit the setting mode automatically.
8
EN
" icon.