xtpower MP-4U20000 Handbuch Seite 2

This product is a rechargeable battery (Power Bank) that can be used to
power mobile devices. The stored energy after full charge is about 74Wh
which will be provided with an output voltage of 5V from the USB
output.
For the best use of the power bank and for your safety, please read
these instructions carefully before using the power bank.
Safety
- Use only a 5V power adapter for charging, otherwise you may
cause damage to the device.
- The product is not suitable for children as it contains fragile and
small parts that can be swallowed easily.
- Please do not drop and do not immerse in water as the unit will
be damaged.
- Do not expose to high temperatures or flammable gases.
- Please do not remove the housing.
- Please don't directly connect any contacts as this can lead to short
circuits.
Warnings:
- The unit may explode near or in an open flame.
- The unit should not be opened.
- Rechargeable batteries must not come into contact with liquids.
- The Power Bank should not be short-circuited or brought into
contact with metal
- Operating temperature range -20 ° C and max. 45 ° C
- Please keep batteries out of reach of children
- Don't put batteries in your mouth
Warranty and Liability:
- If there is a problem with the device, please contact your dealer.
- The manufacturer is not liable for injury or damage caused by
improper use.
- Modification of the product, misuse or unauthorized repair will
void the warranty.
- XTPower reserves the right to make changes to the product or the
instructions and manuals without prior notice.
Specifications:
1. Battery Type: Lithium-Polymer
2. Battery Capacity: 20000mAh/77Wh
3. Input power 5V 1500mA
4. USB output: : 4x 5V 2100/1000/1300/500mA
5. Dimensions: 142 x 74 x 30mm
6. Weight: 430g
Accessories:
- Powerbank MP-4U20000
- USB-Cable
- 10 adapter (u.a. Micro-USB, Mini-USB, PSP, NDS
Nokia N70, LG KG800, Sony K750, Samsung G600, Samsung D800,
Apple iPhone/iPad/iPod)
Battery Indicator:
- Press of the switch button (on / off) which turns on the power
bank and gives you a charge indication
- The 4 LEDs indicate the current state of charge. More lit LED's,
indicate a higher state of charge.
- The LED's turn off after 10 sec.
www.xtpower.de
Charging the Power Bank:
- Your Power Bank comes partially charged. Please charge the new
power bank completely before using.
- Connect the micro USB port of the power bank with a 5V power
source. You can use the included USB cable and an appropriate
adapter
- An appropriate power source is the USB port on your computer or
an optional AC adapter with USB output (5V).
Note: Very often you can use the original charger for your mobile
device, such as charger for the Apple iPhone or Apple iPad.
- The active charging function is indicated by a flashing LED. The
number of lit LEDs shows the current charge level of the power
bank during charging.
- Don't store the power bank in fully discharged state for long
periods of time, please recharge from time to time.
Charge your mobile device:
- Take the USB plug of the supplied USB cable and connect it to the
USB port of the power bank.
- Choose the appropriate connector for your device, connect it to
the USB cable and then plug it into your device.
- You can also use the original USB cable of your device.
- In case charging does not start automatically, briefly press the
switch button (on / off) in addition to the LED status lights. Your
mobile device will now be charging.
- When your device is fully charged or the Power Bank is not being
used, the Power Bank switches off automatically.
Disposal
- Batteries and Power Banks should not be disposed of with
household waste.
- Recycling and disposal of waste batteries and Power Banks make
an important contribution to protect our environment.
- Batteries Directive: 2006/66/EC
CE Declaration of Conformity:
- This product bears the required CE marking according to Directive
2004/108/EC. The product meets the essential requirements of
the European directives and regulations.
140129
MP-4U20000