WeatherMate WM300 Betriebsanleitung

P.O. Box 1767
Covington, LA, 70434 USA
WM300 WeatherMate
Open the case and click into the fully opened position OR, if
using a tri/unipod, click to 90-degree position and attach,
using the threaded fitting in the bottom of the case.
POWER ON by pressing the ON/OFF button momentarily.
POWER OFF by pressing and holding the ON/OFF button for
approx. 3 seconds.
AUTO POWER OFF: if the meter is inactive for approx. 5
minutes, it will automatically shut down to preserve the
battery.
OPERATING MODES: Turn the unit on using the ON/OFF
button. Use the MODE button on the left to scroll to the
desired function. To turn off the unit, press and hold the
ON/OFF button for 3 seconds, until the display is blank, then
release.
CHANGING UNITS OF MEASURE: With the WeatherMate
on, change the units of measure by selecting the mode you
wish to change (Windspeed or Temperature). Next, press
the UNIT button to change the units of measure. When
changing the mode for windspeed, you will need to press the
UNIT key repeatedly to scroll through options (MPH, KPH,
FPM, MPS, BF (Beaufort) and KNT.
(985) 892-3870
www.weathermate.us
Manual Version 1.00