Hama 00049241 Bedienungsanleitung Seite 5

00049241bda 15.01.2004
User's Manual
3.5" 9in1 Cardreader, USB 2.0
Attention: Please install the software supplied with this product
Multislot card reader!
Installing the software
Place the enclosed CD-ROM in your CD drive.
Select Start
with letter of your CD drive) or click
to restart your computer.
Once this is done, remove the CD-ROM from the drive.
Connect the Multislot card reader.
Important Information for Windows XP:
card reader may no longer be available after the system is restarted.
If this is the case, please install Windows XP Service Pack 1 (recommended) or leave
a card (e.g. CF card) in the card reader when you start the computer.
Installing the hardware
Attention: If you are unsure about installing the hardware yourself, please contact
a specialist.
Before installation, switch off your computer and disconnect it from the
mains. Open the PC case.
Install the Multislot in an empty 3.5" bay using the screws provided.
Connect the Multislot to your computer's USB port using one of the
USB 2.0 leads supplied.
Attention: Observe the assignment of the USB connections on your mainboard when
using the internal USB connections.
Check the operating instructions of the your mainboard.
Downloaded from www.Manualslib.com
11:28 Uhr Seite 5
and enter : most likely must be replaced
and select the file specified above.
"Yes, I want to restart my computer now" and click
have Service Pack 1 (Microsoft Update) the
manuals search engine
installing the