Ultimate Sound PS12 Installations- Und Bedienungsanleitung Seite 5

Downloaded from www.Manualslib.com
V. Installation- Ported Enclosures
1. Ported enclosures use a tuned vent to get additional output at the tuning
frequency. Smaller ports than recommended may cause noise from air
turbulence. Flared ports will produce less turbulence and noise.
Remember to glue and screw all joints, using enough glue to make sure
all joints are air tight.
2. Make sure there is at least 2" between the end of the port and the
adjacent wall of the enclosure.
Recommended Vented Enclosures
Volume
Driver Displacement
Port Displacement
Total Enclosure Volume
Port Diameter
Port Length
Tuning
F
3
Volume
Driver Displacement
Port Displacement
Total Enclosure Volume
Port Diameter
Port Length
Tuning
F
3
Width
Ultimate
5
manuals search engine
Maximum Volume PS12
2.3ft
0.144ft
0.02ft3/0.57L
2.46ft3/69.75L
3"/76mm
5"/127mm
33Hz
36Hz
Maximum Volume PS10
1.5ft
0.09ft
0.03ft3/0.85L
1.624ft3/45.9L
3"/76mm
8.4"/213.4mm
35Hz
36Hz
® ®
Ultimate Sound
3
/65.1L
3
/4.08L
3
/42.5L
3
/2.55L
Depth